lkml.org 
[lkml]   [2015]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] power: max17042_battery: add HEALTH and TEMP_* properties support
From
2015-06-08 10:22 GMT+09:00 Krzysztof Kozlowski <k.kozlowski@samsung.com>:
> 2015-05-24 12:41 GMT+09:00 Ramakrishna Pallala <ramakrishna.pallala@intel.com>:
>> This patch adds the support for following battery properties
>> to max17042 fuel gauge driver.
>>
>> POWER_SUPPLY_PROP_TEMP_ALERT_MIN
>> POWER_SUPPLY_PROP_TEMP_ALERT_MAX
>> POWER_SUPPLY_PROP_TEMP_MIN
>> POWER_SUPPLY_PROP_TEMP_MAX
>> POWER_SUPPLY_PROP_HEALTH
>
> I wonder, have you tested the patch? After booting on Trats2 device
> (max77693 which identifies itself as 17047-like) the values are:
> POWER_SUPPLY_TEMP_ALERT_MIN=1280
> POWER_SUPPLY_TEMP_ALERT_MAX=1270
> POWER_SUPPLY_TEMP=257
> This is okay, datasheet says that register after booting will have
> value of 0x7f80.
>
> However setting them to some value which should trigger interrupts
> (like 300 for MIN or 200 for MAX) does not trigger the interrupt. I
> added a printk in max17042_thread_handler().
>
> Is the temperature alert feature working?

Dear Ramakrishna Pallala,

Can you reply to my question above?
If this feature is not working, then it should be removed.

Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2015-06-23 03:21    [W:0.102 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site