lkml.org 
[lkml]   [2015]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Fwd: Re: [PATCH 2/2] ARM: mvebu: dts: Add dts file for DLink DNS-327L
Hi Andrew,


>
> Sorry for the long delay with testing, but here come the results.
> I've rebased everything to 4.1-rc1
>
> 1. WFI + DeepIdle => freeze after approx:
> * 1 hours and 30 minutes, first test
> * 3 hours and 40 minutes, second test
> 2. WFI only (DeepIdle disabled via sysfs) => Still alive after 13 hours
> and counting

Thanks for testing it. So, to sum-up, WFI+DeepIdle makes the board freeze
after a few hours in 4.1-rc1 and 4.0 for sure. Are you aware of any version
that did not freeze? It would help to know if it was a regression or not.

Andrew Lunn did not report any issue on his 370RD however I will test
it also on an other Armada 370 base board (a Mirabox) using the .config
you already sent.

But what I expect is either a hardware issue, or a hardware configuration
issue in U-Boot. We still rely a lot on the bootloader and I fear that
we have some implicit assumptions.

By the way do you have access on the bootloader sources or at least could
you give us the U-boot version used?

Thanks,

Gregory



>
> The proper patchset will follow as soon as I figure out what change
> broke
> dns320l-daemon (The utility that speaks to weltrend mcu on ttyS1)
> It was working on 3.18.6, on 3.19 and up - it writes data to the port
> (and mcu acks it),
> but can't read any responses.
>
> Same thing happens to the python (pyserial inside) implementation of the
> fan-daemon:
> https://github.com/martignlo/DNS-320L
>


--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com


\
 
 \ /
  Last update: 2015-05-06 14:21    [W:0.046 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site