lkml.org 
[lkml]   [2015]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 05/18] x86/mtrr: Clean up mtrr_type_lookup()
Date
From: Toshi Kani <toshi.kani@hp.com>

MTRRs contain fixed and variable entries. mtrr_type_lookup() may
repeatedly call __mtrr_type_lookup() to handle a request that overlaps
with variable entries.

However, __mtrr_type_lookup() also handles the fixed entries, which
do not have to be repeated. Therefore, this patch creates separate
functions, mtrr_type_lookup_fixed() and mtrr_type_lookup_variable(), to
handle the fixed and variable ranges respectively.

The patch also updates the function headers to clarify the return values
and output argument. It updates comments to clarify that the repeating
is necessary to handle overlaps with the default type, since overlaps
with multiple entries alone can be handled without such repeating.

There is no functional change in this patch.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Cc: dave.hansen@intel.com
Cc: Elliott@hp.com
Cc: pebolle@tiscali.nl
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: linux-mm <linux-mm@kvack.org>
Cc: x86-ml <x86@kernel.org>
Cc: lkml <linux-kernel@vger.kernel.org>
Link: http://lkml.kernel.org/r/1431714237-880-6-git-send-email-toshi.kani@hp.com
Signed-off-by: Borislav Petkov <bp@suse.de>
---
arch/x86/kernel/cpu/mtrr/generic.c | 138 +++++++++++++++++++++++--------------
1 file changed, 86 insertions(+), 52 deletions(-)

diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 7b1491c6232d..e51100c49eea 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -102,55 +102,68 @@ static int check_type_overlap(u8 *prev, u8 *curr)
return 0;
}

-/*
- * Error/Semi-error returns:
- * MTRR_TYPE_INVALID - when MTRR is not enabled
- * *repeat == 1 implies [start:end] spanned across MTRR range and type returned
- * corresponds only to [start:*partial_end].
- * Caller has to lookup again for [*partial_end:end].
+/**
+ * mtrr_type_lookup_fixed - look up memory type in MTRR fixed entries
+ *
+ * Return the MTRR fixed memory type of 'start'.
+ *
+ * MTRR fixed entries are divided into the following ways:
+ * 0x00000 - 0x7FFFF : This range is divided into eight 64KB sub-ranges
+ * 0x80000 - 0xBFFFF : This range is divided into sixteen 16KB sub-ranges
+ * 0xC0000 - 0xFFFFF : This range is divided into sixty-four 4KB sub-ranges
+ *
+ * Return Values:
+ * MTRR_TYPE_(type) - Matched memory type
+ * MTRR_TYPE_INVALID - Unmatched
+ */
+static u8 mtrr_type_lookup_fixed(u64 start, u64 end)
+{
+ int idx;
+
+ if (start >= 0x100000)
+ return MTRR_TYPE_INVALID;
+
+ /* 0x0 - 0x7FFFF */
+ if (start < 0x80000) {
+ idx = 0;
+ idx += (start >> 16);
+ return mtrr_state.fixed_ranges[idx];
+ /* 0x80000 - 0xBFFFF */
+ } else if (start < 0xC0000) {
+ idx = 1 * 8;
+ idx += ((start - 0x80000) >> 14);
+ return mtrr_state.fixed_ranges[idx];
+ }
+
+ /* 0xC0000 - 0xFFFFF */
+ idx = 3 * 8;
+ idx += ((start - 0xC0000) >> 12);
+ return mtrr_state.fixed_ranges[idx];
+}
+
+/**
+ * mtrr_type_lookup_variable - look up memory type in MTRR variable entries
+ *
+ * Return Value:
+ * MTRR_TYPE_(type) - Matched memory type or default memory type (unmatched)
+ *
+ * Output Argument:
+ * repeat - Set to 1 when [start:end] spanned across MTRR range and type
+ * returned corresponds only to [start:*partial_end]. Caller has
+ * to lookup again for [*partial_end:end].
*/
-static u8 __mtrr_type_lookup(u64 start, u64 end, u64 *partial_end, int *repeat)
+static u8 mtrr_type_lookup_variable(u64 start, u64 end, u64 *partial_end,
+ int *repeat)
{
int i;
u64 base, mask;
u8 prev_match, curr_match;

*repeat = 0;
- if (!mtrr_state_set)
- return MTRR_TYPE_INVALID;
-
- if (!(mtrr_state.enabled & MTRR_STATE_MTRR_ENABLED))
- return MTRR_TYPE_INVALID;

- /* Make end inclusive end, instead of exclusive */
+ /* Make end inclusive instead of exclusive */
end--;

- /* Look in fixed ranges. Just return the type as per start */
- if ((start < 0x100000) &&
- (mtrr_state.have_fixed) &&
- (mtrr_state.enabled & MTRR_STATE_MTRR_FIXED_ENABLED)) {
- int idx;
-
- if (start < 0x80000) {
- idx = 0;
- idx += (start >> 16);
- return mtrr_state.fixed_ranges[idx];
- } else if (start < 0xC0000) {
- idx = 1 * 8;
- idx += ((start - 0x80000) >> 14);
- return mtrr_state.fixed_ranges[idx];
- } else {
- idx = 3 * 8;
- idx += ((start - 0xC0000) >> 12);
- return mtrr_state.fixed_ranges[idx];
- }
- }
-
- /*
- * Look in variable ranges
- * Look of multiple ranges matching this address and pick type
- * as per MTRR precedence
- */
prev_match = MTRR_TYPE_INVALID;
for (i = 0; i < num_var_ranges; ++i) {
unsigned short start_state, end_state, inclusive;
@@ -186,7 +199,8 @@ static u8 __mtrr_type_lookup(u64 start, u64 end, u64 *partial_end, int *repeat)
* advised to lookup again after having adjusted start
* and end.
*
- * Note: This way we handle multiple overlaps as well.
+ * Note: This way we handle overlaps with multiple
+ * entries and the default type properly.
*/
if (start_state)
*partial_end = base + get_mtrr_size(mask);
@@ -215,21 +229,18 @@ static u8 __mtrr_type_lookup(u64 start, u64 end, u64 *partial_end, int *repeat)
return curr_match;
}

- if (mtrr_tom2) {
- if (start >= (1ULL<<32) && (end < mtrr_tom2))
- return MTRR_TYPE_WRBACK;
- }
-
if (prev_match != MTRR_TYPE_INVALID)
return prev_match;

return mtrr_state.def_type;
}

-/*
- * Returns the effective MTRR type for the region
- * Error return:
- * MTRR_TYPE_INVALID - when MTRR is not enabled
+/**
+ * mtrr_type_lookup - look up memory type in MTRR
+ *
+ * Return Values:
+ * MTRR_TYPE_(type) - The effective MTRR type for the region
+ * MTRR_TYPE_INVALID - MTRR is disabled
*/
u8 mtrr_type_lookup(u64 start, u64 end)
{
@@ -237,22 +248,45 @@ u8 mtrr_type_lookup(u64 start, u64 end)
int repeat;
u64 partial_end;

- type = __mtrr_type_lookup(start, end, &partial_end, &repeat);
+ if (!mtrr_state_set)
+ return MTRR_TYPE_INVALID;
+
+ if (!(mtrr_state.enabled & MTRR_STATE_MTRR_ENABLED))
+ return MTRR_TYPE_INVALID;
+
+ /*
+ * Look up the fixed ranges first, which take priority over
+ * the variable ranges.
+ */
+ if ((start < 0x100000) &&
+ (mtrr_state.have_fixed) &&
+ (mtrr_state.enabled & MTRR_STATE_MTRR_FIXED_ENABLED))
+ return mtrr_type_lookup_fixed(start, end);
+
+ /*
+ * Look up the variable ranges. Look of multiple ranges matching
+ * this address and pick type as per MTRR precedence.
+ */
+ type = mtrr_type_lookup_variable(start, end, &partial_end, &repeat);

/*
* Common path is with repeat = 0.
* However, we can have cases where [start:end] spans across some
- * MTRR range. Do repeated lookups for that case here.
+ * MTRR ranges and/or the default type. Do repeated lookups for
+ * that case here.
*/
while (repeat) {
prev_type = type;
start = partial_end;
- type = __mtrr_type_lookup(start, end, &partial_end, &repeat);
+ type = mtrr_type_lookup_variable(start, end, &partial_end, &repeat);

if (check_type_overlap(&prev_type, &type))
return type;
}

+ if (mtrr_tom2 && (start >= (1ULL<<32)) && (end < mtrr_tom2))
+ return MTRR_TYPE_WRBACK;
+
return type;
}

--
1.9.0.258.g00eda23


\
 
 \ /
  Last update: 2015-05-26 11:21    [W:0.442 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site