lkml.org 
[lkml]   [2015]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 0/9] mfd: watchdog: rtc: New driver for ST's LPC IP
> [Alessandro: This just needs RTC Acks now]

Given this patch-set has been on the list for some time now and we
haven't heard from Alessandro in all that time, I'm going to just
apply the set and send out a pull-request to the other Maintainers.

No point waiting any longer IMHO.

> ST's Low Power Controller (LPC) controls two devices; watchdog and RTC.
> Only one of the devices can be used at any one time, which is enforced
> by the Device Driver model.
>
> This driver set provides everything you need to choose one (and only
> one) of the LPC devices to run per I/P block, of which there are two
> on the enabled STiH407 h/w.
>
> Version 7:
> - Fix 2 legacy typos in the binding documentation compatible string
> examples.
>
> Version 6:
> - RTC: GPL v2 => GPL to reflect the information in the header
> - Applied another Reviewed-by from Guenter
>
> Version 5:
> - Disable WDT clock over suspend
> - WDT: GPL v2 => GPL to reflect the information in the header
> - Change module name in Kconfig help and file header
>
> Version 4:
> - Use {readl,writel}_relaxed() calls
> - Add Guenter's Reviewed-by
> - Rebased onto v4.0-rc1
>
> Version 3:
> - Move Regmap pointer into core device data structure
> - Remove error message from devm_ioremap_resource
>
> Version 2:
> - Only calculate keepalive once in probe()
> - Check for a 0 clk_rate
> - Set limits using predefined attributes from watchdog_device
> - CONFIG_PM => CONFIG_SLEEP
> - Call st_wdog_setup() on resume
> - Remove MFD driver -- instead rely on driver probing mechanism
> which continues attempting to bind to different drivers until
> one does not return -ENODEV
>
> Lee Jones (9):
> mfd: dt-bindings: Provide human readable defines for LPC mode choosing
> ARM: multi_v7_defconfig: Enable support for ST's LPC Watchdog
> ARM: multi_v7_defconfig: Enable support for ST's LPC RTC
> ARM: STi: DT: STiH407: Add Device Tree node for the LPC
> watchdog: bindings: Provide ST bindings for ST's LPC Watchdog device
> watchdog: st_wdt: Add new driver for ST's LPC Watchdog
> rtc: bindings: Provide ST bindings for ST's LPC RTC device
> rtc: st: add new driver for ST's LPC RTC
> MAINTAINERS: Add Watchdog and RTC files to STI's maintainer entry
>
> .../devicetree/bindings/rtc/rtc-st-lpc.txt | 25 ++
> .../devicetree/bindings/watchdog/st_lpc_wdt.txt | 38 +++
> MAINTAINERS | 2 +
> arch/arm/boot/dts/stih407-family.dtsi | 20 ++
> arch/arm/configs/multi_v7_defconfig | 2 +
> drivers/rtc/Kconfig | 12 +
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-st-lpc.c | 354 +++++++++++++++++++++
> drivers/watchdog/Kconfig | 13 +
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/st_lpc_wdt.c | 344 ++++++++++++++++++++
> include/dt-bindings/mfd/st-lpc.h | 15 +
> 12 files changed, 827 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt
> create mode 100644 Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt
> create mode 100644 drivers/rtc/rtc-st-lpc.c
> create mode 100644 drivers/watchdog/st_lpc_wdt.c
> create mode 100644 include/dt-bindings/mfd/st-lpc.h
>

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog


\
 
 \ /
  Last update: 2015-04-29 16:01    [W:0.082 / U:0.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site