lkml.org 
[lkml]   [2015]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v1] watchdog: Use a reference cycle counter to avoid scaling issues
Date
Thomas Gleixner <tglx@linutronix.de> writes:

> On Fri, 24 Apr 2015, Thomas Gleixner wrote:
>> On Thu, 23 Apr 2015, Andi Kleen wrote:
>> > > We can just detect the deviation in the callback itself:
>> > >
>> > > u64 now = ktime_get_mono_fast_ns();
>> > >
>> > > if (now - __this_cpu_read(nmi_timestamp) < period)
>> > > return;
>> > >
>> > > __this_cpu_write(nmi_timestamp, now);
>> > >
>> > > It's that simple.
>> >
>> > It's a simple short term hac^wsolution.
>>
>> Yes, and way simpler and less complex for pushing into stable.
>>
>> > But if we had a (hypothetical) system with let's say 10*TSC max you
>> > may end up with quite a few false ticks, as in unnecessary
>> > interrupts. With 100*TSC it would be really bad.
>>
>> And hypothetical systems with 100*TSC justify all that?
>>
>> > There were systems in the past that ran TSC at a much slower frequency,
>> > such as the early AMD Barcelona systems.
>> >
>> > So the problem may eventually come back if not solved properly.
>>
>> There are better ways to do that than using heuristics. We have to
>> deal with 3 variants of the reference counter:
>>
>> 1) Core and Atom: counts bus cycles and we know that frequency already
>> from the local apic calibration
>>
>> 2) Nehalem, Westmere: Same as TSC
>>
>> 3) Sandybridge and later: XCLK which is 100MHz
>>
>> No magic calibration, just use the information which we have on our
>> hands already.
>
> And aside of that calibration stuff emits a warning on everything
> except intel, arc and metag. Very useful.
>
> This is core code and not intel playground.

This warning is only ever compiled on intel and (since last week) on
powerpc.

But sure, it can be fixed.


\
 
 \ /
  Last update: 2015-04-24 12:21    [W:0.098 / U:1.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site