lkml.org 
[lkml]   [2015]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/5] Documentation: devicetree: add Broadcom SATA binding
Date
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
v2: no change

.../devicetree/bindings/ata/brcm,sata-brcmstb.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt

diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt b/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
new file mode 100644
index 000000000000..afeede13e195
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
@@ -0,0 +1,35 @@
+* Broadcom SATA3 AHCI Controller for STB
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible : compatible list, may contain "brcm,bcm7445-ahci" and/or
+ "brcm,sata3-ahci"
+- reg : register mappings for AHCI and SATA_TOP_CTRL
+- reg-names : "ahci" and "top-ctrl"
+- interrupts : interrupt mapping for SATA IRQ
+
+Also see ahci-platform.txt.
+
+Example:
+
+ sata@f045a000 {
+ compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
+ reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>;
+ reg-names = "ahci", "top-ctrl";
+ interrupts = <0 30 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy 0>;
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ phys = <&sata_phy 1>;
+ };
+ };
+
--
1.9.1


\
 
 \ /
  Last update: 2015-04-23 05:41    [W:0.196 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site