Messages in this thread Patch in this message | | | From | Peter Pan 潘栋 (peterpandong) <> | Subject | RE: [PATCH 2/6] mtd: diskonchip: don't call nand_scan_bbt() directly | Date | Thu, 23 Apr 2015 00:30:34 +0000 |
| |
On Thu, Apr 23, 2015 at 01:51:27PM +0000, Brian Norris wrote: > > On Thu, Apr 16, 2015 at 02:11:24AM +0000, Peter Pan 潘栋 (peterpandong) > wrote: > > The diskonchip driver almost uses the default nand_base hooks as-is, > > except that it provides custom on-flash BBT descriptors and avoids > using > > factory-marked bad blockers. > > > > So let's refactor the BBT initialization code into a private > 'late_init' > > hook which handles all the private details. Note the usage of > > NAND_SKIP_BBTSCAN, which allows us to defer the BBT scan until we've > > prepared everything. > > > > Signed-off-by: Brian Norris <computersforpeace@gmail.com> > > Signed-off-by: Peter Pan <peterpandong@micron.com> > > Why are you just resending my patch? You could Ack/Review/Test it > instead. (Did you test it?)
My work is in the 6th patch. I already tested the patch with micron own nand controller. I don't have platform with docg4 or diskonchip controller. So the BBT and nand_base.c part is covered while docg4.c and diskonchip.c not.
> http://patchwork.ozlabs.org/patch/444605/ > > > --- > > drivers/mtd/nand/diskonchip.c | 27 ++++++++++++++++----------- > > 1 file changed, 16 insertions(+), 11 deletions(-) > > > > diff --git a/drivers/mtd/nand/diskonchip.c > b/drivers/mtd/nand/diskonchip.c > > index f68a7bc..e580014 100644 > > --- a/drivers/mtd/nand/diskonchip.c > > +++ b/drivers/mtd/nand/diskonchip.c > > @@ -69,6 +69,9 @@ struct doc_priv { > > int mh0_page; > > int mh1_page; > > struct mtd_info *nextdoc; > > + > > + /* Handle the last stage of initialization (BBT scan, > partitioning) */ > > + int (*late_init)(struct mtd_info *mtd); > > }; > > > > /* This is the syndrome computed by the HW ecc generator upon > reading an empty > > @@ -1294,10 +1297,10 @@ static int __init nftl_scan_bbt(struct > mtd_info *mtd) > > this->bbt_md = NULL; > > } > > > > - /* It's safe to set bd=NULL below because NAND_BBT_CREATE is not > set. > > - At least as nand_bbt.c is currently written. */ > > - if ((ret = nand_scan_bbt(mtd, NULL))) > > + ret = this->scan_bbt(mtd); > > + if (ret) > > return ret; > > + > > mtd_device_register(mtd, NULL, 0); > > if (!no_autopart) > > mtd_device_register(mtd, parts, numparts); > > @@ -1344,10 +1347,10 @@ static int __init inftl_scan_bbt(struct > mtd_info *mtd) > > this->bbt_md->pattern = "TBB_SYSM"; > > } > > > > - /* It's safe to set bd=NULL below because NAND_BBT_CREATE is not > set. > > - At least as nand_bbt.c is currently written. */ > > - if ((ret = nand_scan_bbt(mtd, NULL))) > > + ret = this->scan_bbt(mtd); > > + if (ret) > > return ret; > > + > > memset((char *)parts, 0, sizeof(parts)); > > numparts = inftl_partscan(mtd, parts); > > /* At least for now, require the INFTL Media Header. We could > probably > > @@ -1369,7 +1372,7 @@ static inline int __init doc2000_init(struct > mtd_info *mtd) > > this->read_byte = doc2000_read_byte; > > this->write_buf = doc2000_writebuf; > > this->read_buf = doc2000_readbuf; > > - this->scan_bbt = nftl_scan_bbt; > > + doc->late_init = nftl_scan_bbt; > > > > doc->CDSNControl = CDSN_CTRL_FLASH_IO | CDSN_CTRL_ECC_IO; > > doc2000_count_chips(mtd); > > @@ -1396,13 +1399,13 @@ static inline int __init doc2001_init(struct > mtd_info *mtd) > > can have multiple chips. */ > > doc2000_count_chips(mtd); > > mtd->name = "DiskOnChip 2000 (INFTL Model)"; > > - this->scan_bbt = inftl_scan_bbt; > > + doc->late_init = inftl_scan_bbt; > > return (4 * doc->chips_per_floor); > > } else { > > /* Bog-standard Millennium */ > > doc->chips_per_floor = 1; > > mtd->name = "DiskOnChip Millennium"; > > - this->scan_bbt = nftl_scan_bbt; > > + doc->late_init = nftl_scan_bbt; > > return 1; > > } > > } > > @@ -1415,7 +1418,7 @@ static inline int __init > doc2001plus_init(struct mtd_info *mtd) > > this->read_byte = doc2001plus_read_byte; > > this->write_buf = doc2001plus_writebuf; > > this->read_buf = doc2001plus_readbuf; > > - this->scan_bbt = inftl_scan_bbt; > > + doc->late_init = inftl_scan_bbt; > > this->cmd_ctrl = NULL; > > this->select_chip = doc2001plus_select_chip; > > this->cmdfunc = doc2001plus_command; > > @@ -1591,6 +1594,8 @@ static int __init doc_probe(unsigned long > physadr) > > nand->ecc.bytes = 6; > > nand->ecc.strength = 2; > > nand->bbt_options = NAND_BBT_USE_FLASH; > > + /* Skip the automatic BBT scan so we can run it manually */ > > + nand->options |= NAND_SKIP_BBTSCAN; > > > > doc->physadr = physadr; > > doc->virtadr = virtadr; > > @@ -1608,7 +1613,7 @@ static int __init doc_probe(unsigned long > physadr) > > else > > numchips = doc2001_init(mtd); > > > > - if ((ret = nand_scan(mtd, numchips))) { > > + if ((ret = nand_scan(mtd, numchips)) || (ret = doc- > >late_init(mtd))) { > > /* DBB note: i believe nand_release is necessary here, as > > buffers may have been allocated in nand_base. Check > with > > Thomas. FIX ME! */ > > -- > > 1.9.1 > >
| |