lkml.org 
[lkml]   [2015]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 2/7] ARM: at91/dt: at91-kizbox: sanitize file
    Date
    Consists in:
    * sorting nodes by address as possible or alphabetically,
    * adding myself as new maintainer and
    * update license.

    Signed-off-by: Gaël PORTAY <g.portay@overkiz.com>
    ---
    arch/arm/boot/dts/at91-kizbox.dts | 67 +++++++++++++++++++--------------------
    1 file changed, 32 insertions(+), 35 deletions(-)

    diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
    index e83e4f9..00c86c1 100644
    --- a/arch/arm/boot/dts/at91-kizbox.dts
    +++ b/arch/arm/boot/dts/at91-kizbox.dts
    @@ -1,16 +1,16 @@
    /*
    - * kizbox.dts - Device Tree file for Overkiz Kizbox board
    + * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board
    *
    - * Copyright (C) 2012 Boris BREZILLON <linux-arm@overkiz.com>
    + * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com>
    + * 2014-2015 Gaël PORTAY <g.portay@overkiz.com>
    *
    - * Licensed under GPLv2.
    + * Licensed under GPLv2 or later.
    */
    /dts-v1/;
    #include "at91sam9g20.dtsi"

    / {
    -
    - model = "Overkiz kizbox";
    + model = "Overkiz Kizbox";
    compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";

    chosen {
    @@ -38,10 +38,6 @@

    ahb {
    apb {
    - dbgu: serial@fffff200 {
    - status = "okay";
    - };
    -
    usart0: serial@fffb0000 {
    status = "okay";
    };
    @@ -57,6 +53,10 @@
    status = "okay";
    };

    + dbgu: serial@fffff200 {
    + status = "okay";
    + };
    +
    watchdog@fffffd40 {
    timeout-sec = <15>;
    atmel,max-heartbeat-sec = <16>;
    @@ -65,6 +65,11 @@
    };
    };

    + usb0: ohci@00500000 {
    + num-ports = <1>;
    + status = "okay";
    + };
    +
    nand0: nand@40000000 {
    nand-bus-width = <8>;
    nand-ecc-mode = "soft";
    @@ -79,24 +84,36 @@
    label = "ubi";
    reg = <0xc0000 0x7f40000>;
    };
    + };
    + };
    +
    + gpio_keys {
    + compatible = "gpio-keys";
    + #address-cells = <1>;
    + #size-cells = <0>;

    + reset {
    + label = "reset";
    + gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
    + linux,code = <0x100>;
    + gpio-key,wakeup;
    };

    - usb0: ohci@00500000 {
    - num-ports = <1>;
    - status = "okay";
    + mode {
    + label = "mode";
    + gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
    + linux,code = <0x101>;
    + gpio-key,wakeup;
    };
    };

    i2c@0 {
    status = "okay";

    - pcf8563@51 {
    - /* nxp pcf8563 rtc */
    + rtc: pcf8563@51 {
    compatible = "nxp,pcf8563";
    reg = <0x51>;
    };
    -
    };

    leds {
    @@ -127,24 +144,4 @@
    linux,default-trigger = "none";
    };
    };
    -
    - gpio_keys {
    - compatible = "gpio-keys";
    - #address-cells = <1>;
    - #size-cells = <0>;
    -
    - reset {
    - label = "reset";
    - gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
    - linux,code = <0x100>;
    - gpio-key,wakeup;
    - };
    -
    - mode {
    - label = "mode";
    - gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
    - linux,code = <0x101>;
    - gpio-key,wakeup;
    - };
    - };
    };
    --
    1.9.1


    \
     
     \ /
      Last update: 2015-04-21 14:41    [W:5.358 / U:1.664 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site