lkml.org 
[lkml]   [2015]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] net/macb: merge at91_ether driver into macb driver
Date
Hello,

The rm9200 boards use the dedicated at91_ether driver instead of the
regular macb driver.

Both the macb and at91_ether drivers can be compiled as separated
modules.
Since the at91_ether driver uses code from the macb driver, at91_ether.ko
depends on macb.ko.

However the macb.ko module always fails to load on rm9200 boards: the
macb_probe() function expects a hclk clock which doesn't exist on rm9200.
Then the at91_ether.ko can't be loaded in turn due to unresolved
dependencies.

This series of patches fix this issue by merging at91_ether into macb.

Best Rrgards,

Boris

Changes since v1:
- rework probe functions to share common probing logic

Cyrille Pitchen (2):
net/macb: unify clock management
net/macb: merge at91_ether driver into macb driver

drivers/net/ethernet/cadence/Kconfig | 8 -
drivers/net/ethernet/cadence/Makefile | 1 -
drivers/net/ethernet/cadence/at91_ether.c | 481 ----------------------
drivers/net/ethernet/cadence/macb.c | 662 ++++++++++++++++++++++--------
drivers/net/ethernet/cadence/macb.h | 10 +-
5 files changed, 494 insertions(+), 668 deletions(-)
delete mode 100644 drivers/net/ethernet/cadence/at91_ether.c

--
1.9.1



\
 
 \ /
  Last update: 2015-03-06 07:21    [W:0.059 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site