Messages in this thread | | | Date | Fri, 6 Mar 2015 10:40:45 +0800 | From | Peter Chen <> | Subject | Re: parent/child hierarchy for regulator |
| |
On Thu, Mar 05, 2015 at 01:18:54PM +0100, Stefan Wahren wrote: > Hi Peter, > > Am 05.03.2015 um 11:35 schrieb Peter Chen: > > Hi lists, > > > > Any good ways at code/dts to show parent/child hierarchy for regulator? > > > > The related regulators at my platforms like below: > > PMIC (SWB 5v) --> Switch Chip (GPIO Regulator) --> USB VBUS > > > > PMIC has one 5V regulator (eg, swbst at pfuse), and it is the input > > for USB power switch chip, and there are two gpios at this switch > > chip to control if 5V is output or not, we register these two gpios as > > fixed regulators, currently, if regulator swbst is disabled, the > > gpio regulator has no way to know, and cause the vbus voltage is wrong. > > > > Thanks in advance. > > > > i don't have an answer to your question, but do you think of i.MX28 > platform? >
No, many Freescale i.mx6 SDB boards need to consider this problem. --
Best Regards, Peter Chen
| |