lkml.org 
[lkml]   [2015]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ASoC: fsl_ssi: Don't try to round-up for PM divisor calculation
Date
According to i.MX6 Series Reference Manual, the formula to calculate
the sys clock is

sysclk rate = bclk rate * (div2 + 1) * (7 * psr + 1) * (pm + 1) * 2

Commit aafa85e71a75 ("ASoC: fsl_ssi: Add DAI master mode support for
SSI on i.MX series") added the divisor calculation which relies on
the clk_round_rate(). However, at that time, clk_round_rate() didn't
provide closest clock rates for some cases because it might not use
a correct rounding policy. So using the original formula (pm + 1) for
PM divisor was not able to give us a desired clock rate. And then we
used (pm + 2) to do the trick.

However, the clk-divider driver has been refined a lot since commit
b11d282dbea2 ("clk: divider: fix rate calculation for fractional rates")
Now using (pm + 2) trick would result an incorrect clock rate.

So this patch fixes the problem by removing the useless trick.

Reported-by: Stephane Cerveau <scerveau@voxtok.com>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
---
sound/soc/fsl/fsl_ssi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 05575f4..6b0c8f7 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -603,7 +603,7 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
factor = (div2 + 1) * (7 * psr + 1) * 2;

for (i = 0; i < 255; i++) {
- tmprate = freq * factor * (i + 2);
+ tmprate = freq * factor * (i + 1);

if (baudclk_is_used)
clkrate = clk_get_rate(ssi_private->baudclk);
--
1.9.1


\
 
 \ /
  Last update: 2015-03-05 06:21    [W:0.046 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site