lkml.org 
[lkml]   [2015]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 11/15] twl4030_charger: enable manual enable/disable of usb charging.
On Mon, 2 Mar 2015 22:03:42 +0100 Pavel Machek <pavel@ucw.cz> wrote:

> On Tue 2015-02-24 15:33:52, NeilBrown wrote:
> > 'off' or 'auto' to
> >
> > /sys/class/power/twl4030_usb/mode
> >
> > will now enable or disable charging from USB port. Normally this is
> > enabled on 'plug' and disabled on 'unplug'.
> > Unplug will still disable charging. 'plug' will only enable it if
> > 'auto' if selected.
>
> This should go to Documentation/

You mean in Documentation/ABI/stable I guess??

That strikes me as a failed experiment - there is hardly anything there.

I'd be very happy to put the documentation with the code if there was some
mechanism to automatically extract it. But I really see little value in
Documentation/ABI.

Or did you mean somewhere else?


>
> > Signed-off-by: NeilBrown <neilb@suse.de>
> >
> > Conflicts:
> > drivers/power/twl4030_charger.c
>
> Is it supposed to be here?

ah, no. Gone now. Thanks.


>
> > diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
> > index 01090a440583..19e8dbb1303e 100644
> > --- a/drivers/power/twl4030_charger.c
> > +++ b/drivers/power/twl4030_charger.c
> > @@ -107,6 +107,9 @@ struct twl4030_bci {
> > int ichg_eoc, ichg_lo, ichg_hi;
> > int usb_cur, ac_cur;
> > bool ac_is_active;
> > + int usb_mode; /* charging mode requested */
> > +#define CHARGE_OFF 0
> > +#define CHARGE_AUTO 1
> >
> > unsigned long event;
> > };
> > @@ -377,6 +380,8 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
> > {
> > int ret;
> >
> n> + if (bci->usb_mode == CHARGE_OFF)
> > + enable = false;
>
> Sometimes, you use = false and sometimes = 0 when assigning to bools...

I found a fixed a few - thanks.


>
> > @@ -629,6 +634,54 @@ static int twl4030_bci_usb_ncb(struct notifier_block *nb, unsigned long val,
> > return NOTIFY_OK;
> > }
> >
> > +/*
> > + * sysfs charger enabled store
> > + */
> > +static char *modes[] = { "off", "auto" };
>
> I'd move this before the comment. Or better near struct twl4030_bci.

Makes sense. Done. Thanks.


>
> > +static DEVICE_ATTR(mode, 0644, twl4030_bci_mode_show,
> > + twl4030_bci_mode_store);
> > +
> > static int twl4030_charger_get_current(void)
> > {
> > int curr;
> > @@ -799,6 +852,7 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
> > bci->usb_cur = 500000; /* 500mA */
> > else
> > bci->usb_cur = 100000; /* 100mA */
> > + bci->usb_mode = CHARGE_AUTO;
> >
> > bci->dev = &pdev->dev;
> > bci->irq_chg = platform_get_irq(pdev, 0);
> > @@ -885,6 +939,8 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
> > twl4030_charger_update_current(bci);
> > if (device_create_file(bci->usb.dev, &dev_attr_max_current))
> > dev_warn(&pdev->dev, "could not create sysfs file\n");
> > + if (device_create_file(bci->usb.dev, &dev_attr_mode))
> > + dev_warn(&pdev->dev, "could not create sysfs file\n");
> > if (device_create_file(bci->ac.dev, &dev_attr_max_current))
> > dev_warn(&pdev->dev, "could not create sysfs file\n");
> >
> > @@ -917,6 +973,7 @@ static int __exit twl4030_bci_remove(struct platform_device *pdev)
> >
> > device_remove_file(bci->usb.dev, &dev_attr_max_current);
> > device_remove_file(bci->ac.dev, &dev_attr_max_current);
> > + device_remove_file(bci->usb.dev, &dev_attr_mode);
>
> move the line above for consistency with create?

Yep.

>
> Acked-by: Pavel Machek <pavel@ucw.cz>

Thanks a lot!

NeilBrown
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2015-03-04 09:41    [W:0.061 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site