lkml.org 
[lkml]   [2015]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
On Tue, Mar 31, 2015 at 07:50:58PM +0800, Eddie Huang wrote:
> Hi Sascha,
>
> On Tue, 2015-03-31 at 15:08 +0800, Eddie Huang wrote:
> > Hi Sascha,
> >
> > > > > speed <= 400000 here to make this more obvious?
> > > > There are two cases, not only speed<=400000, but I2C_MASTER_WRRD. I tend
> > > > to keep it.
> > >
> > > Still it looks strange. You only ever write this default value to the
> > > register. Putting this register write under an if() seems bogus since
> > > the same value will be in the register the next time this code is
> > > executed. It looks like you should move this register write to some
> > > initialization function.
> > OK, move to mtk_i2c_init_hw function
> >
> Sorry for my negligence. Write-then-read (I2C_MASTER_WRRD) decides
> according to each I2C transfer, so I still need to judge whether set
> I2C_CONTROL_RS and DELAY_LEN here. Other control setting can move to
> init function.

You need to decide whether you have to set the I2C_CONTROL_RS bit, but
you don't need to write the same value to the DELAY_LEN register each
time. It won't change under your hood.

Sascha

--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |


\
 
 \ /
  Last update: 2015-03-31 20:21    [W:0.054 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site