lkml.org 
[lkml]   [2015]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH v2] cpufreq: powernv: Add checks to report cpu frequency throttling conditions
From
Hi Shilpa,

On 27 March 2015 at 00:11, Shilpasri G Bhat
<shilpa.bhat@linux.vnet.ibm.com> wrote:
> Cpu frequency can be throttled due to failures of components like OCC,
> power supply and fan. It can also be throttled due to temperature and
> power limit. We can detect the throttling by checking 1)if max frequency

Add these points in separate lines please, with a space after ). Its not
readable this way..

> is reduced, 2)if the core is put to safe frequency 3)if the SPR based
> frequency management is disabled.

All these three points refer to the state CPU has shifted to ? Sorry it wasn't
clear to the outsiders :), perhaps some more detail on why CPU would have
done that.

> The current status of the core is read from Power Management Status
> Register(PMSR) to check if any of the throttling condition is
> occurred and the appropriate throttling message is reported.

So, what do we want to do on throttling? Just print a warning? Is that
enough? What if CPU gets heated up to a point that it burns up ?

> Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
> ---
> Changes from V1: Removed unused value of PMCR register
>
> drivers/cpufreq/powernv-cpufreq.c | 39 ++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 38 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c
> index 2dfd4fd..4837eed 100644
> --- a/drivers/cpufreq/powernv-cpufreq.c
> +++ b/drivers/cpufreq/powernv-cpufreq.c
> @@ -36,7 +36,7 @@
> #define POWERNV_MAX_PSTATES 256
>
> static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1];
> -static bool rebooting;
> +static bool rebooting, throttled;
>
> /*
> * Note: The set of pstates consists of contiguous integers, the
> @@ -294,6 +294,40 @@ static inline unsigned int get_nominal_index(void)
> return powernv_pstate_info.max - powernv_pstate_info.nominal;
> }
>
> +static void powernv_cpufreq_throttle_check(unsigned int cpu)
> +{
> + unsigned long pmsr;
> + int pmsr_pmax, pmsr_lp;
> +
> + pmsr = get_pmspr(SPRN_PMSR);
> +
> + /* Check for Pmax Capping */
> + pmsr_pmax = (s8)((pmsr >> 32) & 0xFF);

u8 ?

> + if (pmsr_pmax != powernv_pstate_info.max) {
> + throttled = true;
> + pr_warn("Cpu %d Pmax is reduced to %d\n", cpu, pmsr_pmax);
> + }
> +
> + /* Check for Psafe by reading LocalPstate
> + * or check if Psafe_mode_active- 34th bit is set in PMSR.
> + */

Proper multi-line comment format is:

/*
* ....
*/


> + pmsr_lp = (s8)((pmsr >> 48) & 0xFF);
> + if ((pmsr_lp < powernv_pstate_info.min) || ((pmsr >> 30) & 1)) {
> + throttled = true;
> + pr_warn("Cpu %d in Psafe %d PMSR[34]=%lx\n", cpu,
> + pmsr_lp, ((pmsr >> 30) & 1));
> + }
> +
> + /* Check if SPR_EM_DISABLED- 33rd bit is set in PMSR */
> + if ((pmsr >> 31) & 1) {
> + throttled = true;
> + pr_warn("Frequency management disabled cpu %d PMSR[33]=%lx\n",
> + cpu, ((pmsr >> 31) & 1));
> + }
> + if (throttled)
> + pr_warn("Cpu Frequency is throttled\n");
> +}
> +
> /*
> * powernv_cpufreq_target_index: Sets the frequency corresponding to
> * the cpufreq table entry indexed by new_index on the cpus in the
> @@ -307,6 +341,9 @@ static int powernv_cpufreq_target_index(struct cpufreq_policy *policy,
> if (unlikely(rebooting) && new_index != get_nominal_index())
> return 0;
>
> + if (!throttled)
> + powernv_cpufreq_throttle_check(smp_processor_id());

And CPU can't come out of throttling again ?

> +
> freq_data.pstate_id = powernv_freqs[new_index].driver_data;


\
 
 \ /
  Last update: 2015-03-27 05:41    [W:0.052 / U:0.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site