lkml.org 
[lkml]   [2015]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 3/4] ARM: dts: sun8i: Add Reduced Serial Bus controller device node to A23 dtsi
    Date
    This patch adds a device node for the Reduced Serial Bus (RSB)
    controller and the defacto pinmux setting to the A23 dtsi.

    Since there is only one possible pinmux setting for RSB, just
    set it in the dtsi.

    Signed-off-by: Chen-Yu Tsai <wens@csie.org>
    ---
    arch/arm/boot/dts/sun8i-a23.dtsi | 21 +++++++++++++++++++++
    1 file changed, 21 insertions(+)

    diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi
    index 382ebd137ee4..fd9b4c811a5f 100644
    --- a/arch/arm/boot/dts/sun8i-a23.dtsi
    +++ b/arch/arm/boot/dts/sun8i-a23.dtsi
    @@ -600,6 +600,13 @@
    #size-cells = <0>;
    #gpio-cells = <3>;

    + r_rsb_pins: r_rsb {
    + allwinner,pins = "PL0", "PL1";
    + allwinner,function = "s_rsb";
    + allwinner,drive = <SUN4I_PINCTRL_20_MA>;
    + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
    + };
    +
    r_uart_pins_a: r_uart@0 {
    allwinner,pins = "PL2", "PL3";
    allwinner,function = "s_uart";
    @@ -607,5 +614,19 @@
    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
    };
    };
    +
    + r_rsb: i2c@01f03400 {
    + compatible = "allwinner,sun8i-a23-rsb";
    + reg = <0x01f03400 0x400>;
    + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
    + clocks = <&apb0_gates 3>;
    + clock-frequency = <3000000>;
    + resets = <&apb0_rst 3>;
    + pinctrl-names = "default";
    + pinctrl-0 = <&r_rsb_pins>;
    + status = "disabled";
    + #address-cells = <1>;
    + #size-cells = <0>;
    + };
    };
    };
    --
    2.1.4


    \
     
     \ /
      Last update: 2015-03-02 09:41    [W:2.156 / U:0.096 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site