lkml.org 
[lkml]   [2015]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] ARM: dts: warp: Add initial WaRP Board support
Date
The WaRP Board is a Wearable Reference Plaform. The board features:

- Freescale i.MX6 SoloLite processor with 512MB of RAM
- Freescale FXOS8700CQ 6-axis Xtrinsic sensor
- Freescale Kinetis KL16 MCU
- Freescale Xtrinsic MMA955xL intelligent motion sensing platform

The board implements a hybrid architecture to address the evolving
needs of the wearables market. The platform consists of a main board
and an example daughtercard with the ability to add additional
daughtercards for different usage models.

For more information about the project, visit:

http://www.warpboard.org/

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/imx6sl-warp.dts | 190 ++++++++++++++++++++++++++++++++++++++
2 files changed, 192 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/imx6sl-warp.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a1c776b..1b49d57 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -299,7 +299,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-wandboard.dtb \
imx6q-wandboard-revb1.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
- imx6sl-evk.dtb
+ imx6sl-evk.dtb \
+ imx6sl-warp.dtb
dtb-$(CONFIG_SOC_IMX6SX) += \
imx6sx-sabreauto.dtb \
imx6sx-sdb.dtb
diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts
new file mode 100644
index 0000000..904efc4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sl-warp.dts
@@ -0,0 +1,190 @@
+/*
+ * Copyright 2014, 2015 O.S. Systems Software LTDA.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6sl.dtsi"
+
+/ {
+ model = "WaRP Board";
+ compatible = "warp,imx6sl-warp", "fsl,imx6sl";
+
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usb_otg1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 0 0>;
+ enable-active-high;
+ };
+
+ reg_usb_otg2_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 2 0>;
+ enable-active-high;
+ };
+
+ reg_1p8v: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <&reg_usb_otg1_vbus>;
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <&reg_usb_otg2_vbus>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ non-removable;
+ status = "okay";
+};
+
+&iomuxc {
+ imx6sl-warp {
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x41b0b1
+ MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x41b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6SL_PAD_AUD_RXC__UART3_RX_DATA 0x41b0b1
+ MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x41b0b1
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x417059
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x410059
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x417059
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x417059
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x417059
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x417059
+ MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x417059
+ MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x417059
+ MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x417059
+ MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x417059
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170b9
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100b9
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170b9
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170b9
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170b9
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170b9
+ MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170b9
+ MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170b9
+ MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170b9
+ MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170b9
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170f9
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100f9
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170f9
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170f9
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170f9
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170f9
+ MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170f9
+ MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170f9
+ MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170f9
+ MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170f9
+ >;
+ };
+ };
+};
--
2.1.4


\
 
 \ /
  Last update: 2015-03-03 05:21    [W:0.044 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site