lkml.org 
[lkml]   [2015]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 1/1] extcon: usb-gpio: Introduce gpio usb extcon driver
From
Date

Hi Roger,

On Mon, 2015-03-16 at 15:11 +0200, Roger Quadros wrote:
> Hi Ivan,
>
> On 16/03/15 14:32, Ivan T. Ivanov wrote:
> > Hi,
> >
> > On Mon, 2015-02-02 at 12:21 +0200, Roger Quadros wrote:
> > > This driver observes the USB ID pin connected over a GPIO and
> > > updates the USB cable extcon states accordingly.
> > >
> > > The existing GPIO extcon driver is not suitable for this purpose
> > > as it needs to be taught to understand USB cable states and it
> > > can't handle more than one cable per instance.
> > >
> > > For the USB case we need to handle 2 cable states.
> > > 1) USB (attach/detach)
> > > 2) USB-HOST (attach/detach)
> > >
> > > This driver can be easily updated in the future to handle VBUS
> > > events in case it happens to be available on GPIO for any platform.
> > >
> > > Signed-off-by: Roger Quadros <rogerq@ti.com>
> > > ---
> > > v4:
> > > - got rid of id_irqwake flag. Fail if enable/disable_irq_wake() fails
> > > - changed host cable name to "USB-HOST"
> >
> > I am sorry that I am getting a bit little late into this.
> >
> > Isn't supposed that we have to use strings defined in
> > const char extcon_cable_name[][]?
> >
> >
> > > +
> > > +/* List of detectable cables */
> > > +enum {
> > > + EXTCON_CABLE_USB = 0,
> > > + EXTCON_CABLE_USB_HOST,
> > > +
> >
> > Same here: duplicated with enum extcon_cable_name
> >
> > > + EXTCON_CABLE_END,
> > > +};
> > > +
> > > +static const char *usb_extcon_cable[] = {
> > > + [EXTCON_CABLE_USB] = "USB",
> > > + [EXTCON_CABLE_USB_HOST] = "USB-HOST",
> > > + NULL,
> > > +};
>
> I'm not exactly sure how else it is supposed to work if we
> support only a subset of cables from the global extcon_cable_name[][].

I don't see issue that we use just 2 events. I think that we can
reuse enum extcon_cable_name and strings already defined in
extcon_cable_name[][] global variable. It is defined extern in
extcon.h file exactly for this purpose, no?

>
> >
> > <snip>
> >
> > > +
> > > +static int usb_extcon_probe(struct platform_device *pdev)
> > > +{
> > >
> >
> > <snip>
> >
> > > +
> > > + ret = devm_request_threaded_irq(dev, info->id_irq, NULL,
> > > + usb_irq_handler,
> > > + IRQF_TRIGGER_RISING |
> > > + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> >
> > Shouldn't triggers be defined in DTS files?
>
> Could be but we're sure that we always need the trigger for both rising/falling edges
> in this case. So the usage is more appropriately decided from application point of view
> rather than h/w point of view. h/w is generic GPIO.

No strong opinion on this. Could it be that GPIO did't support edge
triggered interrupt, but just level triggered?

Regards,
Ivan



\
 
 \ /
  Last update: 2015-03-16 16:01    [W:0.167 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site