lkml.org 
[lkml]   [2015]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/5] drm/msm/mdp5: Add hardware configuration for msm8x16
Hi,

On 03/09/2015 06:41 PM, Stephane Viau wrote:
> This change adds the hw configuration for msm8x16 chipsets in
> mdp5_cfg module.
>
> Note that only one external display interface is present in this
> configuration (DSI) but has not been enabled yet. It will be enabled
> once drm/msm driver supports DSI connectors.
>
> Signed-off-by: Stephane Viau <sviau@codeaurora.org>
> ---
> drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c | 51 ++++++++++++++++++++++++++++++++-
> 1 file changed, 50 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c
> index 96ea6dd..9ff7ac1 100644
> --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c
> +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c
> @@ -1,5 +1,5 @@
> /*
> - * Copyright (c) 2014 The Linux Foundation. All rights reserved.
> + * Copyright (c) 2014-2015 The Linux Foundation. All rights reserved.
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License version 2 and
> @@ -150,10 +150,59 @@ const struct mdp5_cfg_hw apq8084_config = {
> .max_clk = 320000000,
> };
>
> +const struct mdp5_cfg_hw msm8x16_config = {
> + .name = "msm8x16",
> + .mdp = {
> + .count = 1,
> + .base = { 0x01000 },
> + },
> + .smp = {
> + .mmb_count = 8,
> + .mmb_size = 8192,
> + .clients = {
> + [SSPP_VIG0] = 1, [SSPP_DMA0] = 4,
> + [SSPP_RGB0] = 7, [SSPP_RGB1] = 8,
> + },
> + },
> + .ctl = {
> + .count = 5,
> + .base = { 0x02000, 0x02200, 0x02400, 0x02600, 0x02800 },
> + },
> + .pipe_vig = {
> + .count = 1,
> + .base = { 0x05000 },
> + },
> + .pipe_rgb = {
> + .count = 2,
> + .base = { 0x15000, 0x17000 },
> + },
> + .pipe_dma = {
> + .count = 1,
> + .base = { 0x25000 },
> + },
> + .lm = {
> + .count = 2, /* LM0 and LM3 */
> + .base = { 0x45000, 0x48000 },
> + .nb_stages = 5,
> + },
> + .dspp = {
> + .count = 1,
> + .base = { 0x55000 },
> +
> + },
> + .intf = {
> + .count = 1, /* INTF_1 */
> + .base = { 0x6B800 },

We would need to put the other non-existent INTF_0, INTF_2 and INTF_3
base addresses here too, so that the writes to
REG_MDP5_INTF_TIMING_ENGINE_EN in the patch "Make the intf connection in
config module" access the correct registers.

Archit

> + },
> + /* TODO enable .intfs[] with [1] = INTF_DSI, once DSI is implemented */
> + .max_clk = 320000000,
> +};
> +
> static const struct mdp5_cfg_handler cfg_handlers[] = {
> { .revision = 0, .config = { .hw = &msm8x74_config } },
> { .revision = 2, .config = { .hw = &msm8x74_config } },
> { .revision = 3, .config = { .hw = &apq8084_config } },
> + { .revision = 6, .config = { .hw = &msm8x16_config } },
> };
>
>
>

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project


\
 
 \ /
  Last update: 2015-03-12 10:21    [W:0.128 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site