lkml.org 
[lkml]   [2015]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] clk: mediatek: Export CPU mux clocks for CPU frequency control
Date
Quoting Viresh Kumar (2015-03-05 00:59:50)
> On 5 March 2015 at 13:12, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> > We have clk_set_parent for changing the parent and clk_set_rate to
> > change the rate. Use the former for changing the parent and the latter
> > for changing the rate. What you are interested in is changing the
> > parent, so use clk_set_parent for this and not abuse a side effect
> > of clk_set_rate.
>
> clk_set_rate() for CPUs clock is responsible to change clock rate
> of the CPU. Whether it plays with PLLs or muxes, its not that relevant.

Agreed.

>
> > My suggestion is to take another approach. Implement clk_set_rate for
> > these muxes and in the set_rate hook:
> >
> > - switch mux to intermediate PLL parent
> > - call clk_set_rate() for the real parent PLL
> > - switch mux back to real parent PLL
> >
> > This way the things happening behind the scenes are completely transparent
> > to the cpufreq driver and you can use cpufreq-dt as is without changes.
>
> CPUFreq wants to change to intermediate frequency by itself against
> some magic change behind the scene. The major requirement for that
> comes from the fact that we want to send PRE/POST freq notifiers on
> which loops-per-jiffie depends.

I assume you are saying that you want to update loops-per-jiffie while
at an intermediate frequency. Why? This operation should not take very
long.

Imagine a (hypothetical?) processor that changes frequency in many small
steps until it converges to the target rate. Would you want to update
lpj for every step?

Regards,
Mike


\
 
 \ /
  Last update: 2015-03-11 01:41    [W:0.104 / U:1.996 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site