lkml.org 
[lkml]   [2015]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] mtd: pxa3xx-nand: handle PIO in threaded interrupt
On Fri, Feb 20, 2015 at 07:36:43PM +0100, Robert Jarzmik wrote:
> Change the handling of the data stage in the driver : don't pump data in
> the top-half interrupt, but rather schedule a thread for non dma cases.
>
> This will enable latencies in the data pumping, especially if delays are
> required. Moreover platform shall be more reactive as other interrupts
> can be served while pumping data.
>
> No throughput degradation was observed, at least on the zylonite
> platform, while a slight degradation was being expected.
>
> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
> Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
> Since v1: use IRQF_ONESHOT per Maxime's comment

Pushed to l2-mtd.git. Thanks.

Brian


\
 
 \ /
  Last update: 2015-02-28 10:41    [W:0.028 / U:0.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site