lkml.org 
[lkml]   [2015]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/5] mfd: arizona: Add DT binding documentation for CODEC 32k clock source
Date
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
Documentation/devicetree/bindings/mfd/arizona.txt | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index bfef000..7ca7c1f 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -36,6 +36,11 @@ Optional properties:
- wlf,reset : GPIO specifier for the GPIO controlling /RESET
- wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA

+ - wlf,clk32k-src : Set input source for the CODEC 32kHz clock. This can be
+ set to None (will be derived internally from SYSCLK), MCLK1, or MCLK2.
+ Defines (ARIZONA_32KZ_xxxx) can be found in <dt-bindings/mfd/arizona.txt>.
+ The default if this entry is not present is MCLK2.
+
- wlf,gpio-defaults : A list of GPIO configuration register values. Defines
for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If
absent, no configuration of these registers is performed. If any entry has
--
1.7.2.5


\
 
 \ /
  Last update: 2015-02-28 16:01    [W:0.118 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site