lkml.org 
[lkml]   [2015]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] mmc: dw_mmc: Give a good reset after we give power
Dear, Doug.

Looks good to me. Thanks!

Acked-by: Jaehoon Chung <jh80.chung@samsung.com>

Best Regards,
Jaehoon Chung

On 02/21/2015 03:57 AM, Doug Anderson wrote:
> We should give dw_mmc a good reset after we apply power. On some
> boards vqmmc may actually be connected to the IP block in the SoC so
> it's good to reset after power comes in.
>
> Without this we sometimes see failures enumerating cards on rk3288.
>
> Signed-off-by: Doug Anderson <dianders@chromium.org>
> ---
> drivers/mmc/host/dw_mmc.c | 27 ++++++++++++++++++---------
> 1 file changed, 18 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 43fcae1..6a712ae 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -1119,13 +1119,23 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> mci_writel(slot->host, PWREN, regs);
> break;
> case MMC_POWER_ON:
> - if (!IS_ERR(mmc->supply.vqmmc) && !slot->host->vqmmc_enabled) {
> - ret = regulator_enable(mmc->supply.vqmmc);
> - if (ret < 0)
> - dev_err(slot->host->dev,
> - "failed to enable vqmmc regulator\n");
> - else
> + if (!slot->host->vqmmc_enabled) {
> + if (!IS_ERR(mmc->supply.vqmmc)) {
> + ret = regulator_enable(mmc->supply.vqmmc);
> + if (ret < 0)
> + dev_err(slot->host->dev,
> + "failed to enable vqmmc\n");
> + else
> + slot->host->vqmmc_enabled = true;
> +
> + } else {
> + /* Keep track so we don't reset again */
> slot->host->vqmmc_enabled = true;
> + }
> +
> + /* Reset our state machine after powering on */
> + dw_mci_ctrl_reset(slot->host,
> + SDMMC_CTRL_ALL_RESET_FLAGS);
> }
>
> /* Adjust clock / bus width after power is up */
> @@ -1139,10 +1149,9 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> if (!IS_ERR(mmc->supply.vmmc))
> mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
>
> - if (!IS_ERR(mmc->supply.vqmmc) && slot->host->vqmmc_enabled) {
> + if (!IS_ERR(mmc->supply.vqmmc) && slot->host->vqmmc_enabled)
> regulator_disable(mmc->supply.vqmmc);
> - slot->host->vqmmc_enabled = false;
> - }
> + slot->host->vqmmc_enabled = false;
>
> regs = mci_readl(slot->host, PWREN);
> regs &= ~(1 << slot->id);
>



\
 
 \ /
  Last update: 2015-02-25 12:01    [W:0.066 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site