lkml.org 
[lkml]   [2015]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 1/4] usb: phy: twl4030: make runtime pm more reliable.
A construct like:

if (pm_runtime_suspended(twl->dev))
pm_runtime_get_sync(twl->dev);

is against the spirit of the runtime_pm interface as it
makes the internal refcounting useless.

In this case it is also racy, particularly as 'put_autosuspend'
is use to drop a reference.
When that happens a timer is started and the device is
runtime-suspended after the timeout.
If the above code runs in this window, the device will not be
found to be suspended so no pm_runtime reference is taken.
When the timer expires the device will be suspended, which is
against the intention of the code.

So be more direct is taking and dropping references.
If twl->linkstat is VBUS_VALID or ID_GROUND, then hold a
pm_runtime reference, otherwise don't.

Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/phy/phy-twl4030-usb.c | 20 +++++++++++++-------
1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
index 8e87f54671f3..97c59074233f 100644
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -536,8 +536,13 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)

mutex_lock(&twl->lock);
if (status >= 0 && status != twl->linkstat) {
+ status_changed =
+ (twl->linkstat == OMAP_MUSB_VBUS_VALID ||
+ twl->linkstat == OMAP_MUSB_ID_GROUND)
+ !=
+ (status == OMAP_MUSB_VBUS_VALID ||
+ status == OMAP_MUSB_ID_GROUND);
twl->linkstat = status;
- status_changed = true;
}
mutex_unlock(&twl->lock);

@@ -555,13 +560,10 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
*/
if ((status == OMAP_MUSB_VBUS_VALID) ||
(status == OMAP_MUSB_ID_GROUND)) {
- if (pm_runtime_suspended(twl->dev))
- pm_runtime_get_sync(twl->dev);
+ pm_runtime_get_sync(twl->dev);
} else {
- if (pm_runtime_active(twl->dev)) {
- pm_runtime_mark_last_busy(twl->dev);
- pm_runtime_put_autosuspend(twl->dev);
- }
+ pm_runtime_mark_last_busy(twl->dev);
+ pm_runtime_put_autosuspend(twl->dev);
}
omap_musb_mailbox(status);
}
@@ -768,6 +770,10 @@ static int twl4030_usb_remove(struct platform_device *pdev)

/* disable complete OTG block */
twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
+
+ if (twl->linkstat == OMAP_MUSB_VBUS_VALID ||
+ twl->linkstat == OMAP_MUSB_ID_GROUND)
+ pm_runtime_put_noidle(twl->dev);
pm_runtime_mark_last_busy(twl->dev);
pm_runtime_put(twl->dev);




\
 
 \ /
  Last update: 2015-02-24 05:01    [W:3.656 / U:2.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site