Messages in this thread Patch in this message | | | From | Guenter Roeck <> | Subject | [RFT/RFC PATCH 5/8] net: dsa: mv88e6352: Use common port initialization code | Date | Mon, 23 Feb 2015 11:35:47 -0800 |
| |
This prepares the driver for hardware bridging.
Signed-off-by: Guenter Roeck <linux@roeck-us.net> --- drivers/net/dsa/mv88e6352.c | 19 +------------------ 1 file changed, 1 insertion(+), 18 deletions(-)
diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c index 75cf9e1..d7053db 100644 --- a/drivers/net/dsa/mv88e6352.c +++ b/drivers/net/dsa/mv88e6352.c @@ -220,23 +220,6 @@ static int mv88e6352_setup_port(struct dsa_switch *ds, int p) */ REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000); - /* Port based VLAN map: give each port its own address - * database, allow the CPU port to talk to each of the 'real' - * ports, and allow each of the 'real' ports to only talk to - * the upstream port. - */ - val = (p & 0xf) << 12; - if (dsa_is_cpu_port(ds, p)) - val |= ds->phys_port_mask; - else - val |= 1 << dsa_upstream_port(ds); - REG_WRITE(addr, 0x06, val); - - /* Default VLAN ID and priority: don't set a default VLAN - * ID, and set the default packet priority to zero. - */ - REG_WRITE(addr, 0x07, 0x0000); - /* Port Control 2: don't force a good FCS, set the maximum * frame size to 10240 bytes, don't let the switch add or * strip 802.1q tags, don't discard tagged or untagged frames @@ -281,7 +264,7 @@ static int mv88e6352_setup_port(struct dsa_switch *ds, int p) */ REG_WRITE(addr, 0x19, 0x7654); - return 0; + return mv88e6xxx_setup_port_common(ds, p); } #ifdef CONFIG_NET_DSA_HWMON -- 2.1.0
| |