Messages in this thread | | | Date | Mon, 23 Feb 2015 17:46:17 +0100 | From | Javier Martinez Canillas <> | Subject | Re: [PATCH 1/6] ASoC: max98088: Document DT bindings |
| |
Hello Sylwester,
On 02/20/2015 01:12 PM, Sylwester Nawrocki wrote: > On 20/02/15 01:36, Andreas Färber wrote: >>>> >> So it seems the mclk is not always set up properly by the kernel, >>>> >> relying on firmware. Who's in charge of setting that clock up? >>> > >>> > Right, it seems audio is only working due the firmware doing some previous >>> > setup. Probably it works on every boot if you have "sound init" as a part of >>> > the u-boot boot commands? >> >> Indeed it does, 24 MHz without the reparenting patch, and sound working. > > You can have parent of the CLKOUT clock set by the clk core if it is > specified in device tree in the PMU (the clkout clock supplier) device > node. > > Similarly as we did for the Odroix U3: > https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/exynos4412-odroid-common.dtsi#n39 > > Relying on the clk_set_rate() to set the parent clock is not optimal > IMO. Presumably you need to set select stable parent clock for clkout > like XXTI. But I'm not very familiar with exyno5250 and that might be > something different. >
Thanks a lot for your suggestion. I'll drop Tushar's patch to allow clkout to be reparent during set_rate then and change his DTS patch to set a default parent for CLKOUT using "assigned-clock-parents".
Best regards, Javier
| |