lkml.org 
[lkml]   [2015]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 4/4] phy: add phy-hi6220-usb


On 02/20/2015 12:38 PM, Felipe Balbi wrote:
> On Fri, Feb 20, 2015 at 11:07:21AM +0800, zhangfei wrote:
>> Hi, Balbi
>>
>> On 02/18/2015 10:35 PM, Felipe Balbi wrote:
>>> On Wed, Feb 18, 2015 at 01:44:21PM +0800, zhangfei wrote:
>>>> Hi, Kishon
>>>>
>>>> On 02/18/2015 01:35 PM, Kishon Vijay Abraham I wrote:
>>>>> Hi,
>>>>>
>>>>> On Thursday 12 February 2015 01:07 PM, Zhangfei Gao wrote:
>>>>>> Add usb phy controller for hi6220 platform
>>>>>>
>>>>>> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
>>>>>> ---
>>>>>> drivers/phy/Kconfig | 9 ++
>>>>>> drivers/phy/Makefile | 1 +
>>>>>> drivers/phy/phy-hi6220-usb.c | 306
>>>>>> +++++++++++++++++++++++++++++++++++++++++++
>>>>>> 3 files changed, 316 insertions(+)
>>>>>> create mode 100644 drivers/phy/phy-hi6220-usb.c
>>>>>
>>>>> why is this driver in drivers/phy when it doesn't use the generic PHY
>>>>> framework at all?
>>>>>
>>>>
>>>> Balbi recommended "new drivers only on drivers/phy/", including usb
>>>> phy.
>>>
>>> but it should use the API too. It's not only about a directory, you need
>>> to use the new API.
>>>
>>>> So Move drivers/usb/phy/phy-hi6220-usb.c to
>>>> drivers/phy/phy-hi6220-usb.c, required by Balbi.
>>>
>>> you're reading what I stated the way you like.
>>
>> Sorry for my bad understanding.
>>
>> Still not clear about the otg_set_peripheral, which is required in
>> phy-hi6220-usb.c
>>
>> 1. drivers/usb/dwc2/gadget.c use
>> otg_set_peripheral(hsotg->uphy->otg, &hsotg->gadget);
>>
>> 2. include/linux/phy/phy.h
>> struct phy do not have member otg, while struct usb_phy has.
>>
>> Could you give more hints?
>
> your set_peripheral doesn't do anything, just holds a pointer. Might as
> well not implement it. I'll review your driver more fully tomorrow.
>
> There a few things which must be changed.
>

Thanks in advance.

We need this call back set_peripheral setting otg->gadget, which used in
usb_gadget_connect/disconnect(otg->gadget).

The workable method test here is not provide phy-names = "usb2-phy";
Then dwc2 will still use hsotg->uphy instead of hsotg->phy.
Though devm_phy_create is used in phy-hi6220-usb.c, phy_ops is not used
in fact.

Thanks



\
 
 \ /
  Last update: 2015-02-20 11:41    [W:0.070 / U:0.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site