lkml.org 
[lkml]   [2015]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 1/3] mailbox: Add support for APM X-Gene platform mailbox driver
On Fri, Nov 20, 2015 at 3:47 AM, Jassi Brar <jassisinghbrar@gmail.com> wrote:
> On Mon, Nov 9, 2015 at 11:35 PM, Duc Dang <dhdang@apm.com> wrote:
>> X-Gene mailbox controller provides 8 mailbox channels, with
>> each channel has a dedicated interrupt line.
>>
>> [dhdang: rebase over 4.3-rc5, some minor changes to
>> address comment in v2 patch set]
>>
> Do you want this to go into git logs?

Yes.

I will also rebase the patch set to v4.4-rc1.

>
>> Signed-off-by: Feng Kan <fkan@apm.com>
>> Signed-off-by: Duc Dang <dhdang@apm.com>
>> ---
> here is the right place for any history. And it is good practice to
> specify whatever changes were made from last revision.

I will add change log into this section in next version of the patch.

>
>
>> +
>> +struct slimpro_mbox_chan {
>> + struct device *dev;
>> + struct mbox_chan *chan;
>> + void __iomem *reg;
>> + int id;
>>
> You don't seem to really need 'id'.

I will remove 'id'.

>
>
>> +
>> +static void mb_chan_enable_int(struct slimpro_mbox_chan *mb_chan, u32 mask)
>> +{
>> + u32 val = readl(mb_chan->reg + REG_DB_STATMASK);
>> +
>> + val &= ~mask;
>> + writel(val, mb_chan->reg + REG_DB_STATMASK);
>> +}
>> +
>> +static void mb_chan_disable_int(struct slimpro_mbox_chan *mb_chan, u32 mask)
>> +{
>> + u32 val = readl(mb_chan->reg + REG_DB_STATMASK);
>> +
>> + val |= mask;
>> + writel(val, mb_chan->reg + REG_DB_STATMASK);
>> +}
>> +
> These 2 functions are called just once. And do what other drivers
> usually inline. Wouldn't it be better to directly set & clear the bit
> when needed?

I will fold these 2 functions into their callers and then get rid of them.

>
>> +static int slimpro_mbox_send_data(struct mbox_chan *chan, void *msg)
>> +{
>> + struct slimpro_mbox_chan *mb_chan =
>> + (struct slimpro_mbox_chan *)chan->con_priv;
>> +
> You don't need to typecast a void pointer. Here and elsewhere.

I will remove all the typecast of a void pointer in the driver.

>
>
>> +
>> + /* Setup mailbox links */
>> + for (i = 0; i < MBOX_CNT; i++) {
>> + ctx->mc[i].irq = platform_get_irq(pdev, i);
>>
> You expect every platform to provide exactly 'MBOX_CNT' irqs and they
> must be different (because you don't 'SHARE' when you request).
> Usually developers relax either of the conditions.

I will relax the MBOX_CNT irqs restriction: Platform can provide less
than MBOX_CNT irqs, which also means less than MBOX_CNT mailbox
channels.

>
>
>> +static struct platform_driver slimpro_mbox_driver = {
>> + .probe = slimpro_mbox_probe,
>> + .remove = slimpro_mbox_remove,
>> + .driver = {
>> + .name = "xgene-slimpro-mbox",
>> + .owner = THIS_MODULE,
>>
> No need to set .owner.

I will remove it.

>
> Cheers.

Regards,
Duc Dang.


\
 
 \ /
  Last update: 2015-12-07 11:01    [W:0.082 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site