lkml.org 
[lkml]   [2015]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] PCI: dra7xx: mark dra7xx_pcie_msi irq as IRQF_NO_THREAD
Hi Grygorii,

On Fri, Nov 20, 2015 at 03:59:26PM +0200, Grygorii Strashko wrote:
> On -RT, TI DRA7 PCIe driver always produces below backtrace when the
> first PCI interrupt is triggered:
>
> ------------[ cut here ]------------
> WARNING: CPU: 1 PID: 82 at kernel/irq/handle.c:150 handle_irq_event_percpu+0x14c/0x174()
> irq 460 handler irq_default_primary_handler+0x0/0x14 enabled interrupts
> Modules linked in: ahci_platform(+) ti_vip(+) libahci_platform xhci_pci(+) c_can_platform(+)
> libahci xhci_hcd ti_vpe c_can libata v4l2_mem2mem can_dev gpio_keys leds_gpio
> snd_soc_simple_card usbcore spi_ti_qspi videobuf2_core extcon_usb_gpio omap_wdt
> ti_vpdma videobuf2_dma_contig ti_soc_thermal videobuf2_memops dwc3_omap extcon
> rtc_omap ov1063x v4l2_common videodev media snd_soc_tlv320aic3x omap_rng rng_core omap_remoteproc
> CPU: 1 PID: 82 Comm: irq/26-dra7-pci Not tainted 4.1.10-rt10-02638-g6486d7e-dirty #1
> Hardware name: Generic DRA74X (Flattened Device Tree)
> Backtrace:
> [<c0013060>] (dump_backtrace) from [<c0013280>] (show_stack+0x18/0x1c)
> r7:c07acca0 r6:00000000 r5:c09034e4 r4:00000000
> [<c0013268>] (show_stack) from [<c061ef14>] (dump_stack+0x90/0xac)
> [<c061ee84>] (dump_stack) from [<c00436e4>] (warn_slowpath_common+0x7c/0xb8)
> r7:c07acca0 r6:00000096 r5:00000009 r4:ee4d3e38
> [<c0043668>] (warn_slowpath_common) from [<c0043758>] (warn_slowpath_fmt+0x38/0x40)
> r8:ee3fcc00 r7:000001cc r6:00000000 r5:00000002 r4:c07acc78
> [<c0043724>] (warn_slowpath_fmt) from [<c0085fd0>] (handle_irq_event_percpu+0x14c/0x174)
> r3:000001cc r2:c07acc78
> r4:ecfcdd80
> [<c0085e84>] (handle_irq_event_percpu) from [<c008607c>] (handle_irq_event+0x84/0xb8)
> r10:00000001 r9:ee4b59c0 r8:ee1d0900 r7:00000001 r6:00000000 r5:ecfcdd80
> r4:ee3fcc00
> [<c0085ff8>] (handle_irq_event) from [<c0089240>] (handle_simple_irq+0x90/0x118)
> r5:ee4a9020 r4:ee3fcc00
> [<c00891b0>] (handle_simple_irq) from [<c0085514>] (generic_handle_irq+0x30/0x44)
> r5:ee4a9020 r4:000001cc
> [<c00854e4>] (generic_handle_irq) from [<c034a7d4>] (dra7xx_pcie_msi_irq_handler+0x7c/0x8c)
> r5:ee4a9020 r4:00000001
> [<c034a758>] (dra7xx_pcie_msi_irq_handler) from [<c0086f08>] (irq_forced_thread_fn+0x28/0x5c)
> r5:ee1d0900 r4:ee4b59c0
> [<c0086ee0>] (irq_forced_thread_fn) from [<c00871dc>] (irq_thread+0x128/0x204)
> r7:00000001 r6:00000000 r5:ee4d2000 r4:ee4b59e4
> [<c00870b4>] (irq_thread) from [<c005e2fc>] (kthread+0xd4/0xec)
> r10:00000000 r9:00000000 r8:00000000 r7:c00870b4 r6:ee4b59c0 r5:ee4b5a00
> r4:00000000
> [<c005e228>] (kthread) from [<c000faa8>] (ret_from_fork+0x14/0x2c)
> r7:00000000 r6:00000000 r5:c005e228 r4:ee4b5a00
> ---[ end trace 0000000000000002 ]---

The backtrace might be OK (maybe slightly overkill), but all the
stack addresses are certainly irrelevant and distracting. We only
need enough to recognize the problem. I don't think the modules list
is relevant either.

> This backtrace is triggered because dra7xx_pcie_msi_irq_handler()
> forced to be threaded by default on -RT but, in the same time, it's
> IRQ dispatcher and calls generic_handle_irq(), which leads to
> handle_simple_irq() call. The handle_simple_irq() expected to be
> called with IRQ disabled.
>
> The same issue will also happen if kernel will boot with "threadirqs"
> cmdline parameter (CONFIG_IRQ_FORCED_THREADING).
>
> As discussed in [1], the current DRA7 PCIe hw configuration supports
> 32 interrupts, which cannot change because it's hardwired in silicon,
> this is a single status read and assuming that only a few (most of the
> time it will be exactly ONE) of those interrupts are pending at the
> same time is pretty much a sane assumption. And recommended fix for
> this issue is to request dra7xx_pcie_msi IRQ with IRQF_NO_THREAD flag.
>
> [1] https://lkml.org/lkml/2015/11/3/660
>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> ---
> Changes in v2:
> - comment in code truncated
> Link on v1:
> https://lkml.org/lkml/2015/11/5/593
> drivers/pci/host/pci-dra7xx.c | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c
> index 8c36880..0415192 100644
> --- a/drivers/pci/host/pci-dra7xx.c
> +++ b/drivers/pci/host/pci-dra7xx.c
> @@ -301,8 +301,19 @@ static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx,
> return -EINVAL;
> }
>
> + /*
> + * Mark dra7xx_pcie_msi IRQ as IRQF_NO_THREAD
> + * On -RT and if kernel is booting with "threadirqs" cmd line parameter
> + * the dra7xx_pcie_msi_irq_handler() will be forced threaded but,
> + * in the same time, it's IRQ dispatcher and calls generic_handle_irq(),
> + * which, in turn, will be resolved to handle_simple_irq() call.
> + * The handle_simple_irq() expected to be called with IRQ disabled, as
> + * result kernle will display warning:
> + * "irq XXX handler YYY+0x0/0x14 enabled interrupts".
> + */
> ret = devm_request_irq(&pdev->dev, pp->irq,
> - dra7xx_pcie_msi_irq_handler, IRQF_SHARED,
> + dra7xx_pcie_msi_irq_handler,
> + IRQF_SHARED | IRQF_NO_THREAD,
> "dra7-pcie-msi", pp);

There's similar code in exynos_add_pcie_port(), imx6_add_pcie_port(),
and spear13xx_add_pcie_port(). Do they need similar changes? If not,
why not?

I see your discussion about DRA7 hardware design, but my impression is
that this problem affects anybody who calls dw_handle_msi_irq() from a
handler registered with IRQF_SHARED.

Bjorn

> if (ret) {
> dev_err(&pdev->dev, "failed to request irq\n");
> --
> 2.6.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html


\
 
 \ /
  Last update: 2015-12-04 20:01    [W:0.080 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site