lkml.org 
[lkml]   [2015]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: SoCFPGA ethernet broken
Hi Andrew,

On Fri, 4 Dec 2015, Andrew Lunn wrote:

> On Fri, Dec 04, 2015 at 02:10:50AM +0100, Andrew Lunn wrote:
> > > > FWIW: My initial patch to address the failure worked with the original DTB.
> > >
> > > Can I ask what patch are you referring to? I was sidetracked for a while
> > > on this issue, but I still see it failing as of v4.4-rc3. I'll try to
> > > get back to debugging this.
> >
> > Hi Dinh
> >
> > There are two different patches:
> >
> > https://lkml.org/lkml/2015/10/16/669
> >
> > and
> >
> > https://www.mail-archive.com/netdev@vger.kernel.org/msg83183.html
> >
> > Although the first one works, it keeps searching up and up and up, so
> > you could in theory put the phy properties a lot higher than the MAC.
> >
> > The second patch restricts where it looks for the phy properties to
> > only the MAC. But it does not work. We would like to understand why it
> > does not work.
>
> Hi Dinh
>
> Please could you run this patch and let us know what it outputs.
>
> Thanks
> Andrew
>
> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
> index cf6312fafea5..d7ddc0bb0e7f 100644
> --- a/drivers/net/phy/micrel.c
> +++ b/drivers/net/phy/micrel.c
> @@ -26,6 +26,7 @@
> #include <linux/module.h>
> #include <linux/phy.h>
> #include <linux/micrel_phy.h>
> +#include <linux/netdevice.h>
> #include <linux/of.h>
> #include <linux/clk.h>
>
> @@ -339,9 +340,19 @@ static int ksz9021_config_init(struct phy_device *phydev)
> {
> const struct device *dev = &phydev->dev;
> const struct device_node *of_node = dev->of_node;
> + const struct device *dev_walker;
>
> - if (!of_node && dev->parent->of_node)
> - of_node = dev->parent->of_node;
> + dev_info(dev, "dev->parent: %s\n", dev_name(dev->parent));
> + dev_info(dev, "phydev->attached_dev->dev: %s\n", dev_name(&phydev->attached_dev->dev));
> +
> + dev_walker = &phydev->dev;
> + do {
> + of_node = dev_walker->of_node;
> + dev_info(dev, "walking: %s %p\n",
> + dev_name(dev_walker), of_node);
> + dev_walker = dev_walker->parent;
> +
> + } while (!of_node && dev_walker);
>
> if (of_node) {
> ksz9021_load_values_from_of(phydev, of_node,
>

Here is the output from the above patch:

[ 1.042049] mmc0: new high speed SDHC card at address aaaa
[ 1.048017] mmcblk0: mmc0:aaaa SU32G 29.7 GiB
[ 1.053506] mmcblk0: p1 p2 p3 p4
[ 1.057708] dwc2 ffb40000.usb: Configuration mismatch. Forcing host mode
[ 1.064418] dwc2 ffb40000.usb: no platform data or transceiver defined
[ 1.070966] Micrel KSZ9021 Gigabit PHY stmmac-0:04: dev->parent: stmmac-0
[ 1.077746] Micrel KSZ9021 Gigabit PHY stmmac-0:04: phydev->attached_dev->dev: eth0
[ 1.085389] Micrel KSZ9021 Gigabit PHY stmmac-0:04: walking: stmmac-0:04 (null)
[ 1.092841] Micrel KSZ9021 Gigabit PHY stmmac-0:04: walking: stmmac-0 (null)
[ 1.100042] Micrel KSZ9021 Gigabit PHY stmmac-0:04: walking: ff702000.ethernet ef9f3538
[ 1.133638] Sending DHCP requests ..
[ 5.104138] socfpga-dwmac ff702000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx

BR,
Dinh


\
 
 \ /
  Last update: 2015-12-04 12:41    [W:0.072 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site