lkml.org 
[lkml]   [2015]   [Dec]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: omap3: Include missing bandgap data for ti-soc-thermal driver
Hello,

On Sat, Dec 26, 2015 at 12:32:25AM +0100, Pali Rohár wrote:
> Driver for omap3 with documentation is there since v4.4-rc1.
>
> Signed-off-by: Pali Rohár <pali.rohar@gmail.com>


> ---
> arch/arm/boot/dts/omap34xx.dtsi | 5 +++++
> arch/arm/boot/dts/omap36xx.dtsi | 5 +++++
> 2 files changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
> index 4f6b2d5..c3f488f 100644
> --- a/arch/arm/boot/dts/omap34xx.dtsi
> +++ b/arch/arm/boot/dts/omap34xx.dtsi
> @@ -54,6 +54,11 @@
> #size-cells = <0>;
> };
> };
> +
> + bandgap {
> + reg = <0x48002524 0x4>;
> + compatible = "ti,omap34xx-bandgap";
> + };
> };
> };
>
> diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
> index 86253de..00f98c1 100644
> --- a/arch/arm/boot/dts/omap36xx.dtsi
> +++ b/arch/arm/boot/dts/omap36xx.dtsi
> @@ -86,6 +86,11 @@
> #size-cells = <0>;
> };
> };
> +
> + bandgap {
> + reg = <0x48002524 0x4>;
> + compatible = "ti,omap36xx-bandgap";

Can you please already add on both cases

#thermal-sensor-cells = <0>;
?

This way we can already use them to define thermal zones. Of course,
that alone won't add the thermal zones. A separated patch would be
needed to add the thermal zone for OMAP3.

> + };
> };
> };
>
> --
> 1.7.9.5
>


\
 
 \ /
  Last update: 2015-12-31 19:21    [W:0.032 / U:1.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site