lkml.org 
[lkml]   [2015]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 1/5] dt-bindings: add SMP enable-method for Broadcom NSP
On 02/12/15 08:06, Kapil Hali wrote:
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
>>> @@ -0,0 +1,39 @@
>>> +Broadcom Northstar Plus SoC CPU Enable Method
>>> +---------------------------------------------
>>> +This binding defines the enable method used for starting secondary
>>> +CPUs in the following Broadcom SoCs:
>>> + BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
>>> +
>>> +The enable method is specified by defining the following required
>>> +properties in the "cpus" device tree node:
>>> + - enable-method = "brcm,bcm-nsp-smp";
>>> + - secondary-boot-reg = <...>;
>>
>> Both of these are supposed to be per cpu core.
>
> 'enable-method' if not found in 'cpu' node is looked at in the 'cpus'
> node. Except for two-three SoC families, 'enable-method' is within
> 'cpus' node. Is my interpretation incorrect? Did I miss anything here?

So, what do we do from here? I would appreciate a timely answer from the
DT maintainers here so we can decide on the fate of this patch series
for 4.5.

Thank you
--
Florian


\
 
 \ /
  Last update: 2015-12-03 22:41    [W:0.081 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site