lkml.org 
[lkml]   [2015]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] ASoC: codec: Inno codec driver for RK3036 SoC
Mark,

On 2015年11月06日 00:13, Mark Brown wrote:
> On Thu, Nov 05, 2015 at 05:53:13PM +0800, Shunqian Zheng wrote:
>
> This is basically all good, a few very minor comments below but nothing
> that should take any time to fix.
>
>> +static const char *rk3036_codec_antipop_text[] = {"none", "work"};
>> +static const unsigned int rk3036_codec_antipop_values[] = {0x1, 0x2};
>> +
>> +static SOC_VALUE_ENUM_DOUBLE_DECL(rk3036_codec_antipop_enum, INNO_R09,
>> + INNO_R09_HPL_ANITPOP_SHIFT, INNO_R09_HPR_ANITPOP_SHIFT, 0x3,
>> + rk3036_codec_antipop_text, rk3036_codec_antipop_values);
> This looks like a simple boolean control rather than an enum - it looks
> like it's just turning antipop on and off.
It is a boolean control, but it takes 2 bits -- the value of "on" is b10
and b01 for "off".
So I try to use VALUE_ENUM.

>
>> + SOC_DOUBLE_R_RANGE_TLV("Headphone Volume", INNO_R07, INNO_R08,
>> + INNO_HP_GAIN_SHIFT, INNO_HP_GAIN_N39DB,
>> + INNO_HP_GAIN_0DB, 0, rk3036_codec_hp_tlv),
>> + SOC_DOUBLE("Zero Cross Detect", INNO_R06, INNO_R06_VOUTL_CZ_SHIFT,
>> + INNO_R06_VOUTR_CZ_SHIFT, 1, 0),
> This should be "Zero Cross Switch".
Make change in V3.
>
>> + SOC_DOUBLE("HP Mute", INNO_R09, INNO_R09_HPL_MUTE_SHIFT,
>> + INNO_R09_HPR_MUTE_SHIFT, 1, 1),
> This should be "Headphone Switch".
Make change in V3.
>
>> +static int rk3036_codec_add_widgets(struct snd_soc_codec *codec)
>> +{
>> + struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec);
>> +
>> + snd_soc_add_codec_controls(codec, rk3036_codec_dapm_controls,
>> + ARRAY_SIZE(rk3036_codec_dapm_controls));
>> +
>> + snd_soc_dapm_new_controls(dapm, rk3036_codec_dapm_widgets,
>> + ARRAY_SIZE(rk3036_codec_dapm_widgets));
>> +
>> + snd_soc_dapm_add_routes(dapm, rk3036_codec_dapm_routes,
>> + ARRAY_SIZE(rk3036_codec_dapm_routes));
> Just point at the tables from the driver structure and let the core do
> the initialisation for you.
Make change in V3.
>
>> +static int rk3036_codec_set_bias_level(struct snd_soc_codec *codec,
>> + enum snd_soc_bias_level level)
>> +{
>> + switch (level) {
>> + case SND_SOC_BIAS_STANDBY:
>> + /* set a big current for capacitor charging. */
>> + snd_soc_write(codec, INNO_R10, INNO_R10_MAX_CUR);
>> + /* start precharge */
>> + snd_soc_write(codec, INNO_R06, INNO_R06_DAC_PRECHARGE);
> Do we not need to wait for this to ramp?
The datasheet didn't give the delay value. It works in my tests.

Thank you,
Shunqian




\
 
 \ /
  Last update: 2015-11-06 09:21    [W:0.664 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site