lkml.org 
[lkml]   [2015]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC 3/3] ARM: e3xx: Add header file for pinctrl constants
From
On Fri, Nov 6, 2015 at 8:42 AM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Friday 06 November 2015 08:01:25 Moritz Fischer wrote:
>> Hi Arnd,
>>
>> On Fri, Nov 6, 2015 at 12:54 AM, Arnd Bergmann <arnd@arndb.de> wrote:
>> > On Thursday 05 November 2015 15:41:23 Moritz Fischer wrote:
>> >> +/* Pin names for the E31x usecase */
>> >> +#define E31X_TX_BANDSEL_2 "DB_1"
>> >> +#define E31X_RX1B_BANDSEL_0 "DB_3"
>> >> +#define E31X_RX1B_BANDSEL_1 "DB_5"
>> >> +#define E31X_VCTXRX2_V2 "DB_7"
>> >> +#define E31X_TX_ENABLE1A "DB_9"
>> >> +#define E31X_TX_ENABLE2A "DB_11"
>> >> +#define E31X_TX_BANDSEL_0 "DB_12"
>> >
>> > Why not put the strings directly into the .dts files and change the
>> > lookup table in the driver accordingly:
>> >
>> > +static const struct pinctrl_pin_desc e3xx_pins[] = {
>> > + /* pin0 doesn't exist */
>> > + PINCTRL_PIN(1, "TX_BANDSEL_2"),
>> > + PINCTRL_PIN(3, "RX1B_BANDSEL_0"),
>> > + PINCTRL_PIN(5, "RX1B_BANDSEL_1"),
>> > + PINCTRL_PIN(7, "VCTXRX2_V2"),
>>
>> That's actually the way I initially had it, however the pin names
>> literally changed
>> in the schematic depending on which daughter-board you stick into the slot.
>> So my plan was to add the #defines for the second daughter-board in a
>> follow up patch
>> once the pin assignment is final. This would allow me to have something like:
>>
>> pins = E31X_TX_BANDSEL_2;
>> output-low;
>>
>> in one .dts, while having something like
>>
>> pins = E33X_TX_BANDSEL_2
>> output low;
>>
>> in the second dts
>
> That doesn't seem helpful though, because the assignment of the
> pins is not hidden from the source file that should be documenting
> it: if someone wants to know how the pins are muxed, they now have
> to cross-reference the dts file with the header. If you just put the
> pin number directly into the dts, it becomes completely clear
> what the setting is.

Just to clarify, you're suggesting using "DB_0" etc in the dts file?
At that point
the name becomes kinda useless. I found the PINCTRL_PIN_ANON macro,
but haven't found any use throughout the tree, is using it discouraged?

>> The other option would have been to stick a e31x_pins and a e33x_pins
>> into the driver,
>> and set them according to a compatible string or "ettus,daughterboard"
>> property on probe.
>>
>> Does that make sense, or do you think there's a cleaner / better way
>> to achieve this sort of behavior?
>
> The driver should not be board specific.

Agreed, thank you!

Cheers,

Moritz


\
 
 \ /
  Last update: 2015-11-06 19:21    [W:0.072 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site