Messages in this thread | | | Date | Fri, 6 Nov 2015 11:25:40 +0100 | From | Peter Zijlstra <> | Subject | Re: [RFC PATCH 0/3]perf/core: extend perf_reg and perf_sample_regs_intr |
| |
On Fri, Nov 06, 2015 at 09:04:00PM +1100, Michael Ellerman wrote: > It's a perrenial request from our hardware PMU folks to be able to see the raw > values of the PMU registers. > > I think partly it's so that they can verify that perf is doing what they want, > and some of it is that they're interested in some of the more obscure info that > isn't plumbed out through other perf interfaces. > > We've used various internal hacks over the years to keep them happy. This is an > attempt to use a somewhat standard mechanism. > > It would also be helpful for those of us working on the perf hardware backends, > to be able to verify that we're programming things correctly, without resorting > to debug printks etc. > > Basically we want to sample regs at the time of the perf interrupt, so we > though PERF_SAMPLE_REGS_INTR made senes :) > > But if you think this is the wrong mechanism within perf, then please let us > know. > > I know perf's mission is to abstract as much of the arcane hardware details > into a generic interface and make PMUs actually useful for normal folks, and we > are committed to that, but it would also be useful to be able to get the raw > values for a different type of user. > > Maddy's patch only exports PMC1-6 and MMCR0/1. I think we also need to export > some others, in particular MMCRA has a lot of stuff in it, half of which is not > even architected. So that would have to be exported as "POWER8_MMCRA". And then > there's the SIAR/SDAR/SIER which contain a bunch of info on sampled > instructions that is not currently plumbed out.
OK, no objections then. But this is useful information and should be included in the patch set.
| |