lkml.org 
[lkml]   [2015]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [Linaro-acpi] [PATCH V1 11/11] arm64, pci, acpi: Support for ACPI based PCI hostbridge init
From
Date


On 11/3/2015 12:43 PM, Sinan Kaya wrote:
> In any case, the hardware document says 32 bit configuration space
> access to the host bridge only. I'll get more clarification.
>
I got confirmation this morning that this chip supports 32 bit access to
the root complex configuration space. 8/16/32 bits accesses to the
endpoints are supported.

>>
>> You can probably work around this by using the legacy I/O port method
>> rather than ECAM, if the PCI host bridge itself is functional and just
>> the host bus it is connected to is buggy.
>
> From the sounds of it, we'll need a quirk for config space. We support
> legacy I/O only to make the endpoints happy. Some endpoints do not get
> initialized if they don't have a BAR address assigned to all the BAR
> resources.

We'll need an MCFG fix up.

--
Sinan Kaya
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a
Linux Foundation Collaborative Project


\
 
 \ /
  Last update: 2015-11-05 16:01    [W:0.136 / U:0.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site