lkml.org 
[lkml]   [2015]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 8/9] arm64: dts: Add main Thermal info to rk3368.dtsi
    Date
    This patch add the thermal needed info on RK3368.
    Meanwhile, support the trips to throttle for thermal.

    Signed-off-by: Caesar Wang <wxt@rock-chips.com>

    ---

    Changes in v2:
    - fix a copy wrong name.
    Series-changes: 1
    - support the opt gpio pinctrl state

    Changes in v1: None

    arch/arm64/boot/dts/rockchip/rk3368.dtsi | 36 ++++++++++++++++++++++++++++++++
    1 file changed, 36 insertions(+)

    diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
    index cc093a4..83a2bd2 100644
    --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
    +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
    @@ -45,6 +45,7 @@
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/pinctrl/rockchip.h>
    +#include <dt-bindings/thermal/thermal.h>

    / {
    compatible = "rockchip,rk3368";
    @@ -123,6 +124,8 @@
    reg = <0x0 0x0>;
    cpu-idle-states = <&cpu_sleep>;
    enable-method = "psci";
    +
    + #cooling-cells = <2>; /* min followed by max */
    };

    cpu_l1: cpu@1 {
    @@ -155,6 +158,8 @@
    reg = <0x0 0x100>;
    cpu-idle-states = <&cpu_sleep>;
    enable-method = "psci";
    +
    + #cooling-cells = <2>; /* min followed by max */
    };

    cpu_b1: cpu@101 {
    @@ -404,6 +409,27 @@
    status = "disabled";
    };

    + thermal-zones {
    + #include "rk3368-thermal.dtsi"
    + };
    +
    + tsadc: tsadc@ff280000 {
    + compatible = "rockchip,rk3368-tsadc";
    + reg = <0x0 0xff280000 0x0 0x100>;
    + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
    + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
    + clock-names = "tsadc", "apb_pclk";
    + resets = <&cru SRST_TSADC>;
    + reset-names = "tsadc-apb";
    + pinctrl-names = "init", "default", "sleep";
    + pinctrl-0 = <&otp_gpio>;
    + pinctrl-1 = <&otp_out>;
    + pinctrl-2 = <&otp_gpio>;
    + #thermal-sensor-cells = <1>;
    + rockchip,hw-tshut-temp = <95000>;
    + status = "disabled";
    + };
    +
    gmac: ethernet@ff290000 {
    compatible = "rockchip,rk3368-gmac";
    reg = <0x0 0xff290000 0x0 0x10000>;
    @@ -829,6 +855,16 @@
    };
    };

    + tsadc {
    + otp_gpio: otp-gpio {
    + rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
    + };
    +
    + otp_out: otp-out {
    + rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>;
    + };
    + };
    +
    uart0 {
    uart0_xfer: uart0-xfer {
    rockchip,pins = <2 24 RK_FUNC_1 &pcfg_pull_up>,
    --
    1.9.1


    \
     
     \ /
      Last update: 2015-11-05 06:41    [W:4.121 / U:0.168 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site