lkml.org 
[lkml]   [2015]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/3] dmaengine: ti-dma-crossbar: channel reserving and edma3-tpcc support
On Fri, Oct 30, 2015 at 10:00:35AM +0200, Peter Ujfalusi wrote:
> Hi,
>
> Changes since v1:
> - Fixed issue introduced by the bitops patch: wrong error check, also switch to
> use find_first_zero_bit() instead of find_next_zero_bit()
>
> Cover letter:
>
> This series depends on the eDMA work I have done, which has been now applied:
> https://lkml.org/lkml/2015/10/16/64
>
> DRA7 family of chips have both sDMA and eDMA. Currently only sDMA can be used
> becasue the old driver stack for eDMA did not allowed integration w/o hacks.
>
> Due to the nature of eDMA the crossbar needs to know which eDMA events it can
> use to map incoming events towards the eDMA. In eDMA a channel is wired to be
> used with one specific event. For example eDMA event 14 can only be handled by
> eDMA channel 14.
> The eDMA itself can be shared by different processors in the system (ARM, DSP,
> etc) and since ARM/Linux is the master we need to know which channels are used
> by other cores. Also we need to mask out channels used for memcpy from the
> events we use for HW triggers.

Applied, thanks

--
~Vinod


\
 
 \ /
  Last update: 2015-11-30 16:41    [W:0.074 / U:1.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site