lkml.org 
[lkml]   [2015]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RESEND 1/8] arm: dts: berlin2q: add watchdog nodes
On Sat, 28 Nov 2015 12:36:16 +0100
Sebastian Hesselbarth wrote:

> On 23.11.2015 05:59, Jisheng Zhang wrote:
> > On Fri, 20 Nov 2015 21:19:46 +0100
> > Sebastian Hesselbarth wrote:
> >> On 20.11.2015 04:34, Jisheng Zhang wrote:
> >>> On Thu, 19 Nov 2015 21:47:05 +0100
> >>> Sebastian Hesselbarth wrote:
> >>>> On 16.11.2015 12:09, Jisheng Zhang wrote:
> >>>>> The Marvell Berlin BG2Q has 3 watchdogs which are compatible with the
> >>>>> snps,dw-wdt driver sit in the sysmgr domain. This patch adds the
> >>>>> corresponding device tree nodes.
> >>>>>
> >>>>> Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
> >>>>> ---
> [...]
> >>>>> + wdt0: watchdog@1000 {
> >>>>> + compatible = "snps,dw-wdt";
> >>>>> + reg = <0x1000 0x100>;
> >>>>> + clocks = <&refclk>;
> >>>>> + interrupts = <0>;
> >>>>> + status = "disabled";
> >>>>
> >>>> as the watchdogs are internal and cannot be clock gated
> >>>> at all, how about we remove the status = "disabled" and
> >>>> make them always available?
> >>>
> >>> there are two issues here:
> >>>
> >>> 1. the dw-wdt can't support multiple variants now. I have rewrite the driver
> >>> with watchdog core supplied framework, but the patch isn't sent out and
> >>> may be need time to clean up and review.
> >>
> >> Ok.
> >>
> >>> 2. not all dw-wdt devices are available and functional. This depends on
> >>> board design and configuration.
> >>
> >> I understand that "board design and configuration" may hinder the wdt
> >> to issue a hard reset. But all others are able to issue a soft reset
> >> or just an interrupt, right?
> >>
> >> So, I still don't see why we should disable wdt nodes by default
> >> except for the driver issue above.
> >>
> >>> So IMHO status=disabled and patch5-8 is necessary, what do you think?
> >>
> >> No. I'd agree to enable wdt0 by default and leave wdt[1,2] disabled
> >> because of the driver issue. Patches 5-8 only enable wdt0 anyway.
> >
> > That's fine.
>
> Jisheng,
>
> I amended your SoC dtsi watchdog patches accordingly. wdt0 is
> now always enabled, while the others are disabled.
>
> So, with the changes Patches 1-4 applied to berlin/dt and berlin64/dt
> respectively. Patches 5-8 dropped.
>
> >> As soon as the driver issue is resolved, we enable all wdt nodes
> >> unconditionally.
> >
> > I will submit patch for the wdt driver and hope it will be merged
> > in v4.5.
>
> Ok. Feel free to add a patch that removes the status disabled properties
> again if berlin[64]/dt has already hit mainline in the meantime.

Got it. No problems.

>
> If not, keep me posted on the DW wdt patch outcome.

Will do. These days, I'm focusing on clk patches and some trivial dw-apb-timer
performance improvement patches. I will loop you in the mail when send out
dw wdt driver rewrite patch.

Thanks a lot,
Jisheng



\
 
 \ /
  Last update: 2015-11-30 14:21    [W:0.132 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site