lkml.org 
[lkml]   [2015]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 00/12] usb: early: add support for early printk through USB3 debug port
From
Date


On 11/03/2015 05:42 PM, Dave Young wrote:
> On 10/28/15 at 04:00pm, Lu Baolu wrote:
>> This patch series adds support for early printk through USB3 debug port.
>> USB3 debug port is described in xHCI specification as an optional extended
>> capability.
>>
>> The first patch adds a file in debugfs, through which users can check
>> whether the debug capability is supported by a specific host controller.
>>
>> Patch 2 to 10 add the driver for xHCI debug capability. It interfaces with
>> the register set and provides the required ops (read/write/control) to upper
>> layers. Early printk is one consumer of these ops. The hooks for early printk
>> are introduced in patch 9. This design is similar to what we have done in
>> drivers/usb/early/ehci-dbgp.c.
>>
>> Patch 11 is a minor change to usb_debug module. This change is required to
>> bind usb_debug with the USB3 debug device.
>>
>> Patch 12 is the design document and user guide.
>>
> Nice work, I want to try your patches. But I have only one machine with
> debug capability, I think I can use it as debug target. Can I use another
> machine with usb 3.0 but no debug capability as the debug host?

Yes, you can. The debug host doesn't require debug capability.

Please follow guide in patch 12 when you try it. It has been verified
on Intel Skylake machine.

>
> BTW, I hacked a cable according to usb 3 spec, cut vbus/d+/d-, cross wired
> ss pins.

Good luck. I just bought one from

http://www.datapro.net/products/usb-3-0-super-speed-a-a-debugging-cable.html.

>
> Thanks
> Dave
>



\
 
 \ /
  Last update: 2015-11-04 02:01    [W:0.163 / U:0.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site