lkml.org 
[lkml]   [2015]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] KVM: x86: allow RSM from 64-bit mode
From
Date


On 03/11/2015 15:02, Laszlo Ersek wrote:
> On 11/03/15 14:46, Paolo Bonzini wrote:
>>
>>
>> On 03/11/2015 14:40, Laszlo Ersek wrote:
>>> On 11/03/15 14:29, Paolo Bonzini wrote:
>>>> The SDM says that exiting system management mode from 64-bit mode
>>>> is invalid, but that would be too good to be true. But actually,
>>>> most of the code is already there to support exiting from compat
>>>> mode (EFER.LME=1, EFER.LMA=0). Getting all the way from 64-bit
>>>> mode to real mode only requires clearing CS.L and CR4.PCIDE.
>>>>
>>>> Cc: stable@vger.kernel.org
>>>> Fixes: 660a5d517aaab9187f93854425c4c63f4a09195c
>>>> Cc: Laszlo Ersek <lersek@redhat.com>
>>>> Cc: Radim Krčmář <rkrcmar@redhat.com>
>>>> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
>>>> ---
>>>> arch/x86/kvm/emulate.c | 30 +++++++++++++++++++++++++-----
>>>> 1 file changed, 25 insertions(+), 5 deletions(-)
>>>>
>>>> diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
>>>> index b60fed56671b..1505587d06e9 100644
>>>> --- a/arch/x86/kvm/emulate.c
>>>> +++ b/arch/x86/kvm/emulate.c
>>>> @@ -2484,16 +2484,36 @@ static int em_rsm(struct x86_emulate_ctxt *ctxt)
>>>>
>>>> /*
>>>> * Get back to real mode, to prepare a safe state in which to load
>>>> - * CR0/CR3/CR4/EFER.
>>>> - *
>>>> - * CR4.PCIDE must be zero, because it is a 64-bit mode only feature.
>>>> + * CR0/CR3/CR4/EFER. It's all a bit more complicated if the vCPU
>>>> + * supports long mode.
>>>> */
>>>> + cr4 = ctxt->ops->get_cr(ctxt, 4);
>>>> + if (emulator_has_longmode(ctxt)) {
>>>> + struct desc_struct cs_desc;
>>>> +
>>>> + /* Zero CR4.PCIDE before CR0.PG. */
>>>> + if (cr4 & X86_CR4_PCIDE) {
>>>> + ctxt->ops->set_cr(ctxt, 4, cr4 & ~X86_CR4_PCIDE);
>>>> + cr4 &= ~X86_CR4_PCIDE;
>>>> + }
>>>> +
>>>> + /* A 32-bit code segment is required to clear EFER.LMA. */
>>>> + memset(&cs_desc, 0, sizeof(cs_desc));
>>>> + cs_desc.type = 0xb;
>>>> + cs_desc.s = cs_desc.g = cs_desc.p = 1;
>>>> + ctxt->ops->set_segment(ctxt, 0, &cs_desc, 0, VCPU_SREG_CS);
>>>> + }
>>>> +
>>>> + /* For the 64-bit case, this will clear EFER.LMA. */
>>>> cr0 = ctxt->ops->get_cr(ctxt, 0);
>>>> if (cr0 & X86_CR0_PE)
>>>> ctxt->ops->set_cr(ctxt, 0, cr0 & ~(X86_CR0_PG | X86_CR0_PE));
>>>> - cr4 = ctxt->ops->get_cr(ctxt, 4);
>>>> +
>>>> + /* Now clear CR4.PAE (which must be done before clearing EFER.LME). */
>>>> if (cr4 & X86_CR4_PAE)
>>>> ctxt->ops->set_cr(ctxt, 4, cr4 & ~X86_CR4_PAE);
>>>> +
>>>> + /* And finally go back to 32-bit mode. */
>>>> efer = 0;
>>>> ctxt->ops->set_msr(ctxt, MSR_EFER, efer);
>>>>
>>>> @@ -4454,7 +4474,7 @@ static const struct opcode twobyte_table[256] = {
>>>> F(DstMem | SrcReg | Src2CL | ModRM, em_shld), N, N,
>>>> /* 0xA8 - 0xAF */
>>>> I(Stack | Src2GS, em_push_sreg), I(Stack | Src2GS, em_pop_sreg),
>>>> - II(No64 | EmulateOnUD | ImplicitOps, em_rsm, rsm),
>>>> + II(EmulateOnUD | ImplicitOps, em_rsm, rsm),
>>>> F(DstMem | SrcReg | ModRM | BitOp | Lock | PageTable, em_bts),
>>>> F(DstMem | SrcReg | Src2ImmByte | ModRM, em_shrd),
>>>> F(DstMem | SrcReg | Src2CL | ModRM, em_shrd),
>>>>
>>>
>>> What branch should I test this on top of?
>>
>> Just use whatever you were using before, and revert commit c9db607
>> ("UefiCpuPkg: PiSmmCpuDxeSmm: do not execute RSM from 64-bit mode",
>> 2015-10-14) from your OVMF branch.
>
> Right, I planned to do that OVMF-side revert; I just wasn't sure if e.g.
> kvm/queue had some prerequisite patches for this.

Indeed, you can use either your "part 2" series or Radim's patches from
kvm/queue, it's the same.

Paolo


\
 
 \ /
  Last update: 2015-11-03 15:21    [W:0.245 / U:1.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site