lkml.org 
[lkml]   [2015]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] regulator: Add regmap support to regulator-fixed device tree binding
Date
Add properties for regmap to the regulator-fixed device tree binding:
* Reference the regmap phandle
* Specify the enable offset and enable mask
* Reuse enable-active-high for regmap

This is required for Broadcom BCM63xx SoCs that enable power to
individual peripherals by clearing a bit in the miscIddqCtrl register.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
---
.../bindings/regulator/fixed-regulator.txt | 21 ++++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
index 4fae41d..b499a65 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
@@ -5,13 +5,18 @@ Required properties:

Optional properties:
- gpio: gpio to use for enable control
+- regmap: regmap phandle to use for enable control
+- regmap-offset: register offset when using regmap for enable control
+- regmap-mask: register enable mask when using regmap for enable control
- startup-delay-us: startup time in microseconds
-- enable-active-high: Polarity of GPIO is Active high
+- enable-active-high: Polarity of GPIO/regmap is Active high
If this property is missing, the default assumed is Active low.
- gpio-open-drain: GPIO is open drain type.
If this property is missing then default assumption is false.
-vin-supply: Input supply name.

+Only one of gpio/regmap should be specified.
+
Any property defined as part of the core regulator
binding, defined in regulator.txt, can also be used.
However a fixed voltage regulator is expected to have the
@@ -32,3 +37,17 @@ Example:
gpio-open-drain;
vin-supply = <&parent_reg>;
};
+
+ xyz: fixedregulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regmap = <&syscon>;
+ regmap-offset = <0x4>;
+ regmap-mask = <0x200>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ regulator-boot-on;
+ vin-supply = <&parent_reg>;
+ };
--
2.1.4
--
Simon Arlott


\
 
 \ /
  Last update: 2015-11-28 22:41    [W:0.157 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site