lkml.org 
[lkml]   [2015]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH] net: fec: fix enet_out clock handling
    Date
    When ENET_OUT is being used as reference clock for an external PHY,
    the clock must not be disabled while the PHY is active. Otherwise the
    PHY may lose its internal state and require a reset to become
    functional again.

    A symptom for this bug is a network interface that constantly toggles
    between UP and DOWN state:
    fec 800f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
    fec 800f0000.ethernet eth0: Link is Down
    fec 800f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
    fec 800f0000.ethernet eth0: Link is Down
    [...]

    Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
    ---
    drivers/net/ethernet/freescale/fec_main.c | 34 +++++++++++++------------------
    1 file changed, 14 insertions(+), 20 deletions(-)

    diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
    index d2328fc..d9df4c5 100644
    --- a/drivers/net/ethernet/freescale/fec_main.c
    +++ b/drivers/net/ethernet/freescale/fec_main.c
    @@ -1857,11 +1857,6 @@ static int fec_enet_clk_enable(struct net_device *ndev, bool enable)
    ret = clk_prepare_enable(fep->clk_ahb);
    if (ret)
    return ret;
    - if (fep->clk_enet_out) {
    - ret = clk_prepare_enable(fep->clk_enet_out);
    - if (ret)
    - goto failed_clk_enet_out;
    - }
    if (fep->clk_ptp) {
    mutex_lock(&fep->ptp_clk_mutex);
    ret = clk_prepare_enable(fep->clk_ptp);
    @@ -1873,35 +1868,26 @@ static int fec_enet_clk_enable(struct net_device *ndev, bool enable)
    }
    mutex_unlock(&fep->ptp_clk_mutex);
    }
    - if (fep->clk_ref) {
    - ret = clk_prepare_enable(fep->clk_ref);
    - if (ret)
    - goto failed_clk_ref;
    - }
    + ret = clk_prepare_enable(fep->clk_ref);
    + if (ret)
    + goto failed_clk_ref;
    } else {
    clk_disable_unprepare(fep->clk_ahb);
    - if (fep->clk_enet_out)
    - clk_disable_unprepare(fep->clk_enet_out);
    if (fep->clk_ptp) {
    mutex_lock(&fep->ptp_clk_mutex);
    clk_disable_unprepare(fep->clk_ptp);
    fep->ptp_clk_on = false;
    mutex_unlock(&fep->ptp_clk_mutex);
    }
    - if (fep->clk_ref)
    - clk_disable_unprepare(fep->clk_ref);
    + clk_disable_unprepare(fep->clk_ref);
    }

    return 0;

    failed_clk_ref:
    - if (fep->clk_ref)
    - clk_disable_unprepare(fep->clk_ref);
    + clk_disable_unprepare(fep->clk_ref);
    failed_clk_ptp:
    - if (fep->clk_enet_out)
    - clk_disable_unprepare(fep->clk_enet_out);
    -failed_clk_enet_out:
    - clk_disable_unprepare(fep->clk_ahb);
    + clk_disable_unprepare(fep->clk_ahb);

    return ret;
    }
    @@ -3425,6 +3411,10 @@ fec_probe(struct platform_device *pdev)
    if (ret)
    goto failed_clk;

    + ret = clk_prepare_enable(fep->clk_enet_out);
    + if (ret)
    + goto failed_clk_enet_out;
    +
    ret = clk_prepare_enable(fep->clk_ipg);
    if (ret)
    goto failed_clk_ipg;
    @@ -3509,6 +3499,8 @@ failed_init:
    if (fep->reg_phy)
    regulator_disable(fep->reg_phy);
    failed_regulator:
    + clk_disable_unprepare(fep->clk_enet_out);
    +failed_clk_enet_out:
    clk_disable_unprepare(fep->clk_ipg);
    failed_clk_ipg:
    fec_enet_clk_enable(ndev, false);
    @@ -3531,6 +3523,8 @@ fec_drv_remove(struct platform_device *pdev)
    fec_ptp_stop(pdev);
    unregister_netdev(ndev);
    fec_enet_mii_remove(fep);
    + fec_enet_clk_enable(ndev, false);
    + clk_disable_unprepare(fep->clk_enet_out);
    if (fep->reg_phy)
    regulator_disable(fep->reg_phy);
    of_node_put(fep->phy_node);
    --
    2.1.4


    \
     
     \ /
      Last update: 2015-11-27 15:21    [W:2.765 / U:0.028 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site