lkml.org 
[lkml]   [2015]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 2/2] leds: rt5033: Add RT5033 Flash led device driver
On Wed, 25 Nov 2015, Ingi Kim wrote:

> This patch adds device driver of Richtek RT5033 PMIC.
> The RT5033 Flash LED Circuit is designed for one or two LEDs driving
> for torch and strobe applications, it provides an I2C software command
> to trigger the torch and strobe operation.
>
> Each of LED outputs can contorl a separate LED sharing their setting,
> and can be connected together for a single connected LED.
> One LED is represented by one child node.
>
> Signed-off-by: Ingi Kim <ingi2.kim@samsung.com>
> ---
> drivers/leds/Kconfig | 8 +
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-rt5033.c | 541 +++++++++++++++++++++++++++++++++++++
> include/linux/mfd/rt5033-private.h | 51 ++++

Acked-by: Lee Jones <lee.jones@linaro.org>

> 4 files changed, 601 insertions(+)
> create mode 100644 drivers/leds/leds-rt5033.c
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index b1ab8bd..f41ac9b 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -345,6 +345,14 @@ config LEDS_PCA963X
> LED driver chip accessed via the I2C bus. Supported
> devices include PCA9633 and PCA9634
>
> +config LEDS_RT5033
> + tristate "LED support for RT5033 PMIC"
> + depends on LEDS_CLASS_FLASH && OF
> + depends on MFD_RT5033
> + help
> + This option enables support for on-chip LED driver on
> + RT5033 PMIC.
> +
> config LEDS_WM831X_STATUS
> tristate "LED support for status LEDs on WM831x PMICs"
> depends on LEDS_CLASS
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index e9d53092..77cfad5 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -23,6 +23,7 @@ obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o
> obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
> obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
> obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
> +obj-$(CONFIG_LEDS_RT5033) += leds-rt5033.o
> obj-$(CONFIG_LEDS_GPIO_REGISTER) += leds-gpio-register.o
> obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
> obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
> diff --git a/drivers/leds/leds-rt5033.c b/drivers/leds/leds-rt5033.c
> new file mode 100644
> index 0000000..256df74
> --- /dev/null
> +++ b/drivers/leds/leds-rt5033.c
> @@ -0,0 +1,541 @@
> +/*
> + * led driver for RT5033
> + *
> + * Copyright (C) 2015 Samsung Electronics, Co., Ltd.
> + * Ingi Kim <ingi2.kim@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/led-class-flash.h>
> +#include <linux/mfd/rt5033.h>
> +#include <linux/mfd/rt5033-private.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
> +
> +#define RT5033_LED_FLASH_TIMEOUT_MIN 64000
> +#define RT5033_LED_FLASH_TIMEOUT_STEP 32000
> +#define RT5033_LED_FLASH_BRIGHTNESS_MIN 50000
> +#define RT5033_LED_FLASH_BRIGHTNESS_MAX_1CH 600000
> +#define RT5033_LED_FLASH_BRIGHTNESS_MAX_2CH 800000
> +#define RT5033_LED_FLASH_BRIGHTNESS_STEP 25000
> +#define RT5033_LED_TORCH_BRIGHTNESS_MIN 12500
> +#define RT5033_LED_TORCH_BRIGHTNESS_STEP 12500
> +
> +#define FLED1_IOUT (BIT(0))
> +#define FLED2_IOUT (BIT(1))
> +
> +enum rt5033_fled {
> + FLED1,
> + FLED2,
> +};
> +
> +struct rt5033_sub_led {
> + enum rt5033_fled fled_id;
> + struct led_classdev_flash fled_cdev;
> +
> + u32 flash_brightness;
> + u32 flash_timeout;
> +};
> +
> +/* RT5033 Flash led platform data */
> +struct rt5033_led {
> + struct device *dev;
> + struct mutex lock;
> + struct regmap *regmap;
> + struct rt5033_sub_led sub_leds[2];
> +
> + u32 current_flash_timeout;
> + u32 current_flash_brightness;
> +
> + bool iout_joint;
> + u8 fled_mask;
> + u8 current_iout;
> +};
> +
> +struct rt5033_led_config_data {
> + const char *label[2];
> + u32 flash_max_microamp[2];
> + u32 flash_max_timeout[2];
> + u32 torch_max_microamp[2];
> + u32 num_leds;
> +};
> +
> +static u8 rt5033_torch_brightness_to_reg(u32 ua)
> +{
> + return (ua - RT5033_LED_TORCH_BRIGHTNESS_MIN) /
> + RT5033_LED_TORCH_BRIGHTNESS_STEP;
> +}
> +
> +static u8 rt5033_flash_brightness_to_reg(u32 ua)
> +{
> + return (ua - RT5033_LED_FLASH_BRIGHTNESS_MIN) /
> + RT5033_LED_FLASH_BRIGHTNESS_STEP;
> +}
> +
> +static u8 rt5033_flash_timeout_to_reg(u32 us)
> +{
> + return (us - RT5033_LED_FLASH_TIMEOUT_MIN) /
> + RT5033_LED_FLASH_TIMEOUT_STEP;
> +}
> +
> +static struct rt5033_sub_led *flcdev_to_sub_led(
> + struct led_classdev_flash *fled_cdev)
> +{
> + return container_of(fled_cdev, struct rt5033_sub_led, fled_cdev);
> +}
> +
> +static struct rt5033_led *sub_led_to_led(struct rt5033_sub_led *sub_led)
> +{
> + return container_of(sub_led, struct rt5033_led,
> + sub_leds[sub_led->fled_id]);
> +}
> +
> +static bool rt5033_fled_used(struct rt5033_led *led, enum rt5033_fled fled_id)
> +{
> + u8 fled_bit = (fled_id == FLED1) ? FLED1_IOUT : FLED2_IOUT;
> +
> + return led->fled_mask & fled_bit;
> +}
> +
> +static u8 rt5033_get_iout_to_set(struct rt5033_led *led,
> + enum rt5033_fled fled_id)
> +{
> + u8 fled_bit;
> +
> + if (led->iout_joint)
> + fled_bit = FLED1_IOUT | FLED2_IOUT;
> + else
> + fled_bit = (fled_id == FLED1) ? FLED1_IOUT : FLED2_IOUT;
> +
> + return fled_bit;
> +}
> +
> +static int rt5033_led_iout_disable(struct rt5033_led *led,
> + enum rt5033_fled fled_id)
> +{
> + int ret;
> + u8 fled_bit;
> +
> + fled_bit = rt5033_get_iout_to_set(led, fled_id);
> + led->current_iout &= ~fled_bit;
> +
> + ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
> + RT5033_FLED_FUNC1_MASK,
> + RT5033_FLED_PINCTRL | led->current_iout);
> +
> + return ret;
> +}
> +
> +static int rt5033_set_flash_current(struct rt5033_led *led, u32 micro_amp)
> +{
> + u8 v;
> + int ret;
> +
> + v = rt5033_flash_brightness_to_reg(micro_amp);
> +
> + ret = regmap_write(led->regmap, RT5033_REG_FLED_STROBE_CTRL1, v);
> + if (ret < 0)
> + return ret;
> +
> + led->current_flash_brightness = micro_amp;
> +
> + return 0;
> +}
> +
> +static int rt5033_set_timeout(struct rt5033_led *led, u32 microsec)
> +{
> + u8 v;
> + int ret;
> +
> + v = rt5033_flash_timeout_to_reg(microsec);
> +
> + ret = regmap_write(led->regmap, RT5033_REG_FLED_STROBE_CTRL2, v);
> + if (ret < 0)
> + return ret;
> +
> + led->current_flash_timeout = microsec;
> +
> + return 0;
> +}
> +
> +static int rt5033_led_brightness_set(struct led_classdev *led_cdev,
> + enum led_brightness brightness)
> +{
> + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
> + struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
> + struct rt5033_led *led = sub_led_to_led(sub_led);
> + int fled_id = sub_led->fled_id, ret;
> + u8 fled_bit;
> +
> + mutex_lock(&led->lock);
> +
> + if (!brightness) {
> + ret = rt5033_led_iout_disable(led, fled_id);
> + goto torch_unlock;
> + }
> +
> + fled_bit = rt5033_get_iout_to_set(led, fled_id);
> +
> + ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_CTRL1,
> + RT5033_FLED_CTRL1_MASK, (brightness - 1) << 4);
> + if (ret < 0)
> + goto torch_unlock;
> +
> + if (led->current_iout != fled_bit) {
> + ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
> + RT5033_FLED_FUNC1_MASK,
> + RT5033_FLED_PINCTRL | fled_bit);
> + if (ret < 0)
> + goto torch_unlock;
> + led->current_iout = fled_bit;
> + }
> + ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
> + RT5033_FLED_FUNC2_MASK, RT5033_FLED_ENFLED);
> +
> +torch_unlock:
> + mutex_unlock(&led->lock);
> + return ret;
> +}
> +
> +static int rt5033_led_flash_brightness_set(struct led_classdev_flash *fled_cdev,
> + u32 brightness)
> +{
> + struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
> + struct rt5033_led *led = sub_led_to_led(sub_led);
> +
> + mutex_lock(&led->lock);
> + sub_led->flash_brightness = brightness;
> + mutex_unlock(&led->lock);
> +
> + return 0;
> +}
> +
> +static int rt5033_led_flash_timeout_set(struct led_classdev_flash *fled_cdev,
> + u32 timeout)
> +{
> + struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
> + struct rt5033_led *led = sub_led_to_led(sub_led);
> +
> + mutex_lock(&led->lock);
> + sub_led->flash_timeout = timeout;
> + mutex_unlock(&led->lock);
> +
> + return 0;
> +}
> +
> +static int rt5033_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
> + bool state)
> +{
> + struct rt5033_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
> + struct rt5033_led *led = sub_led_to_led(sub_led);
> + enum rt5033_fled fled_id = sub_led->fled_id;
> + int ret;
> + u8 fled_bit;
> +
> + mutex_lock(&led->lock);
> +
> + fled_bit = rt5033_get_iout_to_set(led, fled_id);
> + led->current_iout = fled_bit;
> +
> + if (state == 0) {
> + ret = rt5033_led_iout_disable(led, fled_id);
> + if (ret < 0)
> + goto strobe_unlock;
> + ret = regmap_update_bits(led->regmap,
> + RT5033_REG_FLED_FUNCTION2,
> + RT5033_FLED_FUNC2_MASK, 0);
> + goto strobe_unlock;
> + }
> +
> + if (sub_led->flash_brightness != led->current_flash_brightness) {
> + ret = rt5033_set_flash_current(led, sub_led->flash_brightness);
> + if (ret < 0)
> + goto strobe_unlock;
> + }
> +
> + if (sub_led->flash_timeout != led->current_flash_timeout) {
> + ret = rt5033_set_timeout(led, sub_led->flash_timeout);
> + if (ret < 0)
> + goto strobe_unlock;
> + }
> +
> + ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
> + RT5033_FLED_FUNC1_MASK, RT5033_FLED_PINCTRL |
> + RT5033_FLED_STRB_SEL | led->current_iout);
> + if (ret < 0)
> + goto strobe_unlock;
> + ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
> + RT5033_FLED_FUNC2_MASK, RT5033_FLED_ENFLED |
> + RT5033_FLED_SREG_STRB);
> +
> + led->current_iout = 0;
> +strobe_unlock:
> + mutex_unlock(&led->lock);
> + return ret;
> +}
> +
> +static const struct led_flash_ops flash_ops = {
> + .flash_brightness_set = rt5033_led_flash_brightness_set,
> + .strobe_set = rt5033_led_flash_strobe_set,
> + .timeout_set = rt5033_led_flash_timeout_set,
> +};
> +
> +static void rt5033_init_flash_properties(struct rt5033_sub_led *sub_led,
> + struct rt5033_led_config_data *led_cfg)
> +{
> + struct led_classdev_flash *fled_cdev = &sub_led->fled_cdev;
> + struct rt5033_led *led = sub_led_to_led(sub_led);
> + struct led_flash_setting *tm_set, *fl_set;
> + enum rt5033_fled fled_id = sub_led->fled_id;
> +
> + tm_set = &fled_cdev->timeout;
> + tm_set->min = RT5033_LED_FLASH_TIMEOUT_MIN;
> + tm_set->max = led_cfg->flash_max_timeout[fled_id];
> + tm_set->step = RT5033_LED_FLASH_TIMEOUT_STEP;
> + tm_set->val = tm_set->max;
> +
> + fl_set = &fled_cdev->brightness;
> + fl_set->min = RT5033_LED_FLASH_BRIGHTNESS_MIN;
> + if (led->iout_joint)
> + fl_set->max = min(led_cfg->flash_max_microamp[FLED1] +
> + led_cfg->flash_max_microamp[FLED2],
> + (u32)RT5033_LED_FLASH_BRIGHTNESS_MAX_2CH);
> + else
> + fl_set->max = min(led_cfg->flash_max_microamp[fled_id],
> + (u32)RT5033_LED_FLASH_BRIGHTNESS_MAX_1CH);
> + fl_set->step = RT5033_LED_FLASH_BRIGHTNESS_STEP;
> + fl_set->val = fl_set->max;
> +}
> +
> +static void rt5033_led_init_fled_cdev(struct rt5033_sub_led *sub_led,
> + struct rt5033_led_config_data *led_cfg)
> +{
> + struct led_classdev_flash *fled_cdev;
> + struct led_classdev *led_cdev;
> + enum rt5033_fled fled_id = sub_led->fled_id;
> +
> + /* Initialize LED Flash class device */
> + fled_cdev = &sub_led->fled_cdev;
> + fled_cdev->ops = &flash_ops;
> + led_cdev = &fled_cdev->led_cdev;
> +
> + led_cdev->name = led_cfg->label[fled_id];
> +
> + led_cdev->brightness_set_blocking = rt5033_led_brightness_set;
> + led_cdev->max_brightness = rt5033_torch_brightness_to_reg(
> + led_cfg->torch_max_microamp[fled_id]);
> + led_cdev->flags |= LED_DEV_CAP_FLASH;
> +
> + rt5033_init_flash_properties(sub_led, led_cfg);
> +
> + sub_led->flash_timeout = fled_cdev->timeout.val;
> + sub_led->flash_brightness = fled_cdev->brightness.val;
> +}
> +
> +static int rt5033_led_parse_dt(struct rt5033_led *led, struct device *dev,
> + struct rt5033_led_config_data *cfg,
> + struct device_node **sub_nodes)
> +{
> + struct device_node *np = dev->of_node;
> + struct device_node *child_node;
> + struct rt5033_sub_led *sub_leds = led->sub_leds;
> + struct property *prop;
> + u32 led_sources[2];
> + enum rt5033_fled fled_id;
> + int i, ret;
> +
> + for_each_available_child_of_node(np, child_node) {
> + prop = of_find_property(child_node, "led-sources", NULL);
> + if (prop) {
> + const __be32 *srcs = NULL;
> +
> + for (i = 0; i < ARRAY_SIZE(led_sources); ++i) {
> + srcs = of_prop_next_u32(prop, srcs,
> + &led_sources[i]);
> + if (!srcs)
> + break;
> + }
> + } else {
> + dev_err(dev, "led-sources DT property missing\n");
> + ret = -EINVAL;
> + goto err_parse_dt;
> + }
> +
> + if (i == 2) {
> + fled_id = FLED1;
> + led->fled_mask = FLED1_IOUT | FLED2_IOUT;
> + } else if (led_sources[0] == FLED1) {
> + fled_id = FLED1;
> + led->fled_mask |= FLED1_IOUT;
> + } else if (led_sources[0] == FLED2) {
> + fled_id = FLED2;
> + led->fled_mask |= FLED2_IOUT;
> + } else {
> + dev_err(dev, "Wrong led-sources DT property value.\n");
> + ret = -EINVAL;
> + goto err_parse_dt;
> + }
> +
> + if (sub_nodes[fled_id]) {
> + dev_err(dev,
> + "Conflicting \"led-sources\" DT properties\n");
> + ret = -EINVAL;
> + goto err_parse_dt;
> + }
> +
> + sub_nodes[fled_id] = child_node;
> + sub_leds[fled_id].fled_id = fled_id;
> +
> + cfg->label[fled_id] =
> + of_get_property(child_node, "label", NULL) ? :
> + child_node->name;
> +
> + ret = of_property_read_u32(child_node, "led-max-microamp",
> + &cfg->torch_max_microamp[fled_id]);
> + if (ret < 0) {
> + dev_err(dev, "failed to parse led-max-microamp\n");
> + goto err_parse_dt;
> + }
> +
> + ret = of_property_read_u32(child_node, "flash-max-microamp",
> + &cfg->flash_max_microamp[fled_id]);
> + if (ret < 0) {
> + dev_err(dev, "failed to parse flash-max-microamp\n");
> + goto err_parse_dt;
> + }
> +
> + ret = of_property_read_u32(child_node, "flash-max-timeout-us",
> + &cfg->flash_max_timeout[fled_id]);
> + if (ret < 0) {
> + dev_err(dev, "failed to parse flash-max-timeout-us\n");
> + goto err_parse_dt;
> + }
> +
> + if (++cfg->num_leds == 2 ||
> + (rt5033_fled_used(led, FLED1) &&
> + rt5033_fled_used(led, FLED2))) {
> + of_node_put(child_node);
> + break;
> + }
> + }
> +
> + if (cfg->num_leds == 0) {
> + dev_err(dev, "No DT child node found for connected LED(s).\n");
> + return -EINVAL;
> + }
> +
> + return 0;
> +
> +err_parse_dt:
> + of_node_put(child_node);
> + return ret;
> +}
> +
> +static int rt5033_led_probe(struct platform_device *pdev)
> +{
> + struct rt5033_dev *rt5033 = dev_get_drvdata(pdev->dev.parent);
> + struct rt5033_led *led;
> + struct rt5033_sub_led *sub_leds;
> + struct device_node *sub_nodes[2] = {};
> + struct rt5033_led_config_data led_cfg = {};
> + int init_fled_cdev[2], i, ret;
> +
> + led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
> + if (!led)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, led);
> + led->dev = &pdev->dev;
> + led->regmap = rt5033->regmap;
> + sub_leds = led->sub_leds;
> +
> + ret = rt5033_led_parse_dt(led, &pdev->dev, &led_cfg, sub_nodes);
> + if (ret < 0)
> + return ret;
> +
> + if (led_cfg.num_leds == 1 && rt5033_fled_used(led, FLED1) &&
> + rt5033_fled_used(led, FLED2))
> + led->iout_joint = true;
> +
> + mutex_init(&led->lock);
> +
> + init_fled_cdev[FLED1] =
> + led->iout_joint || rt5033_fled_used(led, FLED1);
> + init_fled_cdev[FLED2] =
> + !led->iout_joint && rt5033_fled_used(led, FLED2);
> +
> + for (i = FLED1; i <= FLED2; ++i) {
> + if (!init_fled_cdev[i])
> + continue;
> +
> + rt5033_led_init_fled_cdev(&sub_leds[i], &led_cfg);
> + ret = led_classdev_flash_register(led->dev,
> + &sub_leds[i].fled_cdev);
> + if (ret < 0) {
> + if (i == FLED2)
> + goto err_register_led2;
> + else
> + goto err_register_led1;
> + }
> + }
> +
> + led->current_iout = 0;
> + ret = regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
> + RT5033_FLED_FUNC1_MASK, RT5033_FLED_RESET);
> + if (ret < 0)
> + dev_dbg(led->dev, "Failed to reset flash led (%d)\n", ret);
> +
> + return 0;
> +
> +err_register_led2:
> + /* It is possible than only FLED2 was to be registered */
> + if (!init_fled_cdev[FLED1])
> + goto err_register_led1;
> + led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev);
> +err_register_led1:
> + mutex_destroy(&led->lock);
> +
> + return ret;
> +}
> +
> +static int rt5033_led_remove(struct platform_device *pdev)
> +{
> + struct rt5033_led *led = platform_get_drvdata(pdev);
> + struct rt5033_sub_led *sub_leds = led->sub_leds;
> +
> + if (led->iout_joint || rt5033_fled_used(led, FLED1))
> + led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev);
> +
> + if (!led->iout_joint && rt5033_fled_used(led, FLED2))
> + led_classdev_flash_unregister(&sub_leds[FLED2].fled_cdev);
> +
> + mutex_destroy(&led->lock);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id rt5033_led_match[] = {
> + { .compatible = "richtek,rt5033-led", },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, rt5033_led_match);
> +
> +static struct platform_driver rt5033_led_driver = {
> + .driver = {
> + .name = "rt5033-led",
> + .of_match_table = rt5033_led_match,
> + },
> + .probe = rt5033_led_probe,
> + .remove = rt5033_led_remove,
> +};
> +module_platform_driver(rt5033_led_driver);
> +
> +MODULE_AUTHOR("Ingi Kim <ingi2.kim@samsung.com>");
> +MODULE_DESCRIPTION("Richtek RT5033 LED driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:rt5033-led");
> diff --git a/include/linux/mfd/rt5033-private.h b/include/linux/mfd/rt5033-private.h
> index 1b63fc2..b20c7e4 100644
> --- a/include/linux/mfd/rt5033-private.h
> +++ b/include/linux/mfd/rt5033-private.h
> @@ -93,6 +93,57 @@ enum rt5033_reg {
> #define RT5033_RT_CTRL1_UUG_MASK 0x02
> #define RT5033_RT_HZ_MASK 0x01
>
> +/* RT5033 FLED Function1 register */
> +#define RT5033_FLED_FUNC1_MASK 0x97
> +#define RT5033_FLED_EN_LEDCS1 0x01
> +#define RT5033_FLED_EN_LEDCS2 0x02
> +#define RT5033_FLED_STRB_SEL 0x04
> +#define RT5033_FLED_PINCTRL 0x10
> +#define RT5033_FLED_RESET 0x80
> +
> +/* RT5033 FLED Function2 register */
> +#define RT5033_FLED_FUNC2_MASK 0x81
> +#define RT5033_FLED_ENFLED 0x01
> +#define RT5033_FLED_SREG_STRB 0x80
> +
> +/* RT5033 FLED Strobe Control1 */
> +#define RT5033_FLED_STRBCTRL1_MASK 0xFF
> +#define RT5033_FLED_STRBCTRL1_TM_CUR_MAX 0xE0
> +#define RT5033_FLED_STRBCTRL1_FL_CUR_DEF 0x0D
> +#define RT5033_FLED_STRBCTRL1_FL_CUR_MAX 0x1F
> +
> +/* RT5033 FLED Strobe Control2 */
> +#define RT5033_FLED_STRBCTRL2_MASK 0x3F
> +#define RT5033_FLED_STRBCTRL2_TM_DEF 0x0F
> +#define RT5033_FLED_STRBCTRL2_TM_MAX 0x3F
> +
> +/* RT5033 FLED Control1 */
> +#define RT5033_FLED_CTRL1_MASK 0xF7
> +#define RT5033_FLED_CTRL1_TORCH_CUR_DEF 0x20
> +#define RT5033_FLED_CTRL1_TORCH_CUR_MAX 0xF0
> +#define RT5033_FLED_CTRL1_LBP_DEF 0x02
> +#define RT5033_FLED_CTRL1_LBP_MAX 0x07
> +
> +/* RT5033 FLED Control2 */
> +#define RT5033_FLED_CTRL2_MASK 0xFF
> +#define RT5033_FLED_CTRL2_VMID_DEF 0x37
> +#define RT5033_FLED_CTRL2_VMID_MAX 0x3F
> +#define RT5033_FLED_CTRL2_TRACK_ALIVE 0x40
> +#define RT5033_FLED_CTRL2_MID_TRACK 0x80
> +
> +/* RT5033 FLED Control4 */
> +#define RT5033_FLED_CTRL4_MASK 0xE0
> +#define RT5033_FLED_CTRL4_RESV 0x14
> +#define RT5033_FLED_CTRL4_VTRREG_DEF 0x40
> +#define RT5033_FLED_CTRL4_VTRREG_MAX 0x60
> +#define RT5033_FLED_CTRL4_TRACK_CLK 0x80
> +
> +/* RT5033 FLED Control5 */
> +#define RT5033_FLED_CTRL5_MASK 0xC0
> +#define RT5033_FLED_CTRL5_RESV 0x10
> +#define RT5033_FLED_CTRL5_TA_GOOD 0x40
> +#define RT5033_FLED_CTRL5_TA_EXIST 0x80
> +
> /* RT5033 control register */
> #define RT5033_CTRL_FCCM_BUCK_MASK 0x00
> #define RT5033_CTRL_BUCKOMS_MASK 0x01

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog


\
 
 \ /
  Last update: 2015-11-26 10:41    [W:0.120 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site