Messages in this thread | | | Subject | Re: [PATCH] ARM: dts: enable PCIe PHY support for Cygnus | From | Ray Jui <> | Date | Mon, 23 Nov 2015 10:50:16 -0800 |
| |
Any comment on this DT change to enable PCIe PHY support for Cygnus?
Note the PHY driver has been accepted and is in v4.4.
Thanks,
Ray
On 11/18/2015 10:16 AM, Ray Jui wrote: > Enable PCIe PHY for both PCIe root complexes on Cygnus > > Signed-off-by: Ray Jui <rjui@broadcom.com> > --- > arch/arm/boot/dts/bcm-cygnus.dtsi | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > > diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi > index 2778533..5df5300 100644 > --- a/arch/arm/boot/dts/bcm-cygnus.dtsi > +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi > @@ -91,6 +91,21 @@ > #address-cells = <1>; > #size-cells = <1>; > > + pcie_phy: phy@0301d0a0 { > + compatible = "brcm,cygnus-pcie-phy"; > + reg = <0x0301d0a0 0x14>; > + > + pcie0_phy: phy@0 { > + reg = <0>; > + #phy-cells = <0>; > + }; > + > + pcie1_phy: phy@1 { > + reg = <1>; > + #phy-cells = <0>; > + }; > + }; > + > pinctrl: pinctrl@0x0301d0c8 { > compatible = "brcm,cygnus-pinmux"; > reg = <0x0301d0c8 0x30>, > @@ -161,6 +176,9 @@ > ranges = <0x81000000 0 0 0x28000000 0 0x00010000 > 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; > > + phys = <&pcie0_phy>; > + phy-names = "pcie-phy"; > + > status = "disabled"; > }; > > @@ -182,6 +200,9 @@ > ranges = <0x81000000 0 0 0x48000000 0 0x00010000 > 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; > > + phys = <&pcie1_phy>; > + phy-names = "pcie-phy"; > + > status = "disabled"; > }; > >
| |