lkml.org 
[lkml]   [2015]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 7/7] PCI: Set NumVFs before computing how many buses VFs require
On Mon, Nov 02, 2015 at 07:39:48AM -0800, Alexander Duyck wrote:
>On 11/02/2015 12:27 AM, Wei Yang wrote:
>>On Fri, Oct 30, 2015 at 09:03:54AM -0700, Alexander Duyck wrote:
>>>On 10/29/2015 10:22 PM, Wei Yang wrote:
>>>>On Thu, Oct 29, 2015 at 05:23:36PM -0500, Bjorn Helgaas wrote:
>>>>>From: Alexander Duyck <aduyck@mirantis.com>
>>>>>
>>>>>VF bus numbers depend on the First VF Offset and VF Stride, and per
>>>>>sections 3.3.9 and 3.3.10 of the SR-IOV spec r1.1, these depend on the
>>>>>NumVF value.
>>>>>
>>>>>Wait until after we set NumVFs to compute and validate the bus number of
>>>>>the last VF.
>>>>>
>>>>>[bhelgaas: changelog, add spec reference, split to separate patch for
>>>>>reviewability]
>>>>>Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
>>>>>Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
>>>>>---
>>>>>drivers/pci/iov.c | 18 ++++++++++--------
>>>>>1 file changed, 10 insertions(+), 8 deletions(-)
>>>>>
>>>>>diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>>>>>index bd1c4fa..9d29712 100644
>>>>>--- a/drivers/pci/iov.c
>>>>>+++ b/drivers/pci/iov.c
>>>>>@@ -274,13 +274,6 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
>>>>> return -ENOMEM;
>>>>> }
>>>>>
>>>>>- bus = pci_iov_virtfn_bus(dev, nr_virtfn - 1);
>>>>>- if (bus > dev->bus->busn_res.end) {
>>>>>- dev_err(&dev->dev, "can't enable %d VFs (bus %02x out of range of %pR)\n",
>>>>>- nr_virtfn, bus, &dev->bus->busn_res);
>>>>>- return -ENOMEM;
>>>>>- }
>>>>>-
>>>>> if (pci_enable_resources(dev, bars)) {
>>>>> dev_err(&dev->dev, "SR-IOV: IOV BARS not allocated\n");
>>>>> return -ENOMEM;
>>>>>@@ -304,6 +297,15 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
>>>>> }
>>>>>
>>>>> pci_iov_set_numvfs(dev, nr_virtfn);
>>>>How about move it up?
>>>
>>>The idea with moving the write down is to keep the pollution of the SR-IOV
>>>capability to a minimum. Basically we have addressed all of the possible
>>>software issues at this point so all that remains is possible hardware
>>>complications. In addition by moving this code down we only have to modify
>>>this code instead of adding "rc=X; goto foo;" in places where "return X;" was
>>>used.
>>>
>>
>>I think your logic is clear, while it is not easy to classify the software
>>issue and hardware complications. For example, at the beginning of
>>sriov_enable(), the hardware value initial VFs number is checked.
>>
>>And in my mind, this is reasonable to check the hardware issue before software
>>issue.
>>
>>For your comment, adding "rc=X; goto foo;", I don't see this would happen.
>>The code in my mind would like this:
>>
>>
>>+ pci_iov_set_numvfs(dev, nr_virtfn);
>> bus = pci_iov_virtfn_bus(dev, nr_virtfn - 1);
>> if (bus > dev->bus->busn_res.end) {
>> dev_err(&dev->dev, "can't enable %d VFs (bus %02x out of range of %pR)\n",
>> nr_virtfn, bus, &dev->bus->busn_res);
>> return -ENOMEM;
>> }
>>
>> if (pci_enable_resources(dev, bars)) {
>> dev_err(&dev->dev, "SR-IOV: IOV BARS not allocated\n");
>> return -ENOMEM;
>>
>>Do I missed something?
>
>The problem is that pci_iov_set_numvfs has side effects visible to the user
>since they can read NumVFs lspci and via sysfs. As such we want to keep the
>two in sync, and if you get the bus error here that is not the case.
>
>That is why you must call pci_iov_set_numvfs(dev, 0) if this fails.
>

That's the reason. Thanks for letting me know :-)

>- Alex

--
Richard Yang
Help you, Help me



\
 
 \ /
  Last update: 2015-11-03 03:41    [W:0.079 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site