lkml.org 
[lkml]   [2015]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] Add audio support for Broadcom Cygnus SoC
Date
Hi,

This patchset contains audio support for Broadcom's Cygnus SoC. It
contains DT bindings and core audio driver. The audio driver
supports both capture and playback of Audio PCM samples over I2S/TDM
interface and provides playback support over SPDIF interface.

This patchset is derived from a previously submitted patchset:
http://lkml.iu.edu/hypermail/linux/kernel/1503.3/05434.html

This patchset has been tested on Cygnus wireless audio bcm958305K board.
It is based on v4.3-rc5 and is available from github:

repo: https://github.com/Broadcom/cygnus-linux/tree/cygnus-sound-v2

Changes from v1:
- Address code review comments. Fixed print format of type size_t and
pointer.

Simran Rai (2):
dt-bindings: sound: Add DT bindings for Broadcom Cygnus audio
VOIP-5227 Add Broadcom Cygnus audio driver.

.../bindings/sound/brcm,cygnus-audio.txt | 63 +
sound/soc/bcm/Kconfig | 18 +
sound/soc/bcm/Makefile | 5 +
sound/soc/bcm/cygnus-pcm.c | 903 ++++++++++++
sound/soc/bcm/cygnus-ssp.c | 1532 ++++++++++++++++++++
sound/soc/bcm/cygnus-ssp.h | 129 ++
6 files changed, 2650 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
create mode 100644 sound/soc/bcm/cygnus-pcm.c
create mode 100644 sound/soc/bcm/cygnus-ssp.c
create mode 100644 sound/soc/bcm/cygnus-ssp.h

--
1.7.9.5



\
 
 \ /
  Last update: 2015-11-02 23:41    [W:0.072 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site