lkml.org 
[lkml]   [2015]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATH RESEND v2 03/10] tty: xuartps: Always enable transmitter in start_tx
Date
start_tx must start transmitting characters. Regardless of the state of
the circular buffer, always enable the transmitter hardware.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
drivers/tty/serial/xilinx_uartps.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 2c98c357d9a0..df6778d17949 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -512,9 +512,6 @@ static void cdns_uart_start_tx(struct uart_port *port)
{
unsigned int status, numbytes = port->fifosize;

- if (uart_circ_empty(&port->state->xmit) || uart_tx_stopped(port))
- return;
-
/*
* Set the TX enable bit and clear the TX disable bit to enable the
* transmitter.
@@ -524,6 +521,9 @@ static void cdns_uart_start_tx(struct uart_port *port)
status |= CDNS_UART_CR_TX_EN;
writel(status, port->membase + CDNS_UART_CR_OFFSET);

+ if (uart_circ_empty(&port->state->xmit) || uart_tx_stopped(port))
+ return;
+
while (numbytes-- && ((readl(port->membase + CDNS_UART_SR_OFFSET) &
CDNS_UART_SR_TXFULL)) != CDNS_UART_SR_TXFULL) {
/* Break if no more data available in the UART buffer */
--
2.6.3.3.g9bb996a


\
 
 \ /
  Last update: 2015-11-19 21:41    [W:1.543 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site