lkml.org 
[lkml]   [2015]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v11 2/8] Input: goodix - reset device at init
From
Date
On Thu, 2015-11-19 at 14:26 +0200, Irina Tirdea wrote:
> After power on, it is recommended that the driver resets the device.
> The reset procedure timing is described in the datasheet and is used
> at device init (before writing device configuration) and
> for power management. It is a sequence of setting the interrupt
> and reset pins high/low at specific timing intervals. This procedure
> also includes setting the slave address to the one specified in the
> ACPI/device tree.

This fails on a 4.3 kernel with an ACPI device (WinBook TW100):
Goodix-TS: probe of i2c-GDIX1001:00 failed with error -16

Can you please document which upstream commit is necessary to make this
behave properly?

I'll test again with a newer kernel.

Cheers


\
 
 \ /
  Last update: 2015-11-19 16:41    [W:0.294 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site