lkml.org 
[lkml]   [2015]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 03/12] drm/rockchip: return a true clock rate to adjusted_mode
Date
Sometimes the clock driver can not set a accurate clock_rate for vop,
get the true rate of vop_dclk and set it back to adjusted_mode, since
the mipi dsi driver need to use the clock to make the calculation of
Blanking.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

Changes in v3: None
Changes in v2: None

drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index 5d8ae5e..9986b311ed 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1232,6 +1232,12 @@ static int vop_crtc_mode_set(struct drm_crtc *crtc,
reset_control_deassert(vop->dclk_rst);

clk_set_rate(vop->dclk, adjusted_mode->clock * 1000);
+
+ /*
+ * Sometimes the clock driver can not set a accurate clock_rate for vop,
+ * get the true rate of vop_dclk and set it back to adjusted_mode.
+ */
+ adjusted_mode->clock = clk_get_rate(vop->dclk) / 1000;
out:
ret_clk = clk_enable(vop->dclk);
if (ret_clk < 0) {
--
2.6.3


\
 
 \ /
  Last update: 2015-11-19 05:01    [W:0.146 / U:2.588 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site