lkml.org 
[lkml]   [2015]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v12 1/3] dt-bindings: Add a binding for Mediatek xHCI host controller
From
Date
Hi,
On Tue, 2015-11-17 at 13:58 +0300, Sergei Shtylyov wrote:
> Hello.
>
> On 11/17/2015 12:18 PM, Chunfeng Yun wrote:
>
> > add a DT binding documentation of xHCI host controller for the
> > MT8173 SoC from Mediatek.
> >
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> > .../devicetree/bindings/usb/mt8173-xhci.txt | 51 ++++++++++++++++++++++
> > 1 file changed, 51 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/usb/mt8173-xhci.txt
> >
> > diff --git a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
> > new file mode 100644
> > index 0000000..a78f20b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
> > @@ -0,0 +1,51 @@
> > +MT8173 xHCI
> > +
> > +The device node for Mediatek SOC USB3.0 host controller
> > +
> > +Required properties:
> > + - compatible : should contain "mediatek,mt8173-xhci"
> > + - reg : specifies physical base address and size of the registers,
> > + the first one for MAC, the second for IPPC
> > + - interrupts : interrupt used by the controller
> > + - power-domains : a phandle to USB power domain node to control USB's
> > + mtcmos
>
> What's that?
It works as a gateway in fact which can turn on/off usb power
>
> > + - vusb33-supply : regulator of USB avdd3.3v
> > +
> > + - clocks : a list of phandle + clock-specifier pairs, one for each
> > + entry in clock-names
> > + - clock-names : must contain
> > + "sys_ck": for clock of xHCI MAC
> > + "wakeup_deb_p0": for USB wakeup debounce clock of port0
> > + "wakeup_deb_p0": for USB wakeup debounce clock of port1
>
> "wakeup_deb_p1"?
Yes, it's a typo
>
> > +
> > + - phys : a list of phandle + phy specifier pairs
> > +
> > +Optional properties:
> > + - mediatek,wakeup-src : 1: ip sleep wakeup mode; 2: line state wakeup
> ^^ IP?
Ok
>
> > + mode;
> > + - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup
> > + control register, it depends on "mediatek,wakeup-src".
> > + - vbus-supply : reference to the VBUS regulator;
> > + - usb3-lpm-capable : supports USB3.0 LPM
>
> [...]
>
> MBR, Sergei
>




\
 
 \ /
  Last update: 2015-11-19 05:01    [W:0.034 / U:3.864 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site